Pre-Assembly; Planning Assembly; Tools Required; Package Contents - Home Decorators Collection WINDLOWE 15101-VS61C-WT Assembly Instructions Manual

Pre-assembly

PLANNING ASSEMBLY

To ensure your installation goes smoothly, please read these instructions carefully and review the recommended tools and hardware before
you begin.
To remove the old vanity (if applicable): 1) Turn off the water supply and drain out. 2) Disconnect the supply lines from the faucet.
3) Remove the old vanity top and vanity. If the new vanity is not installed immediately, temporarily stuff a rag into the drain pipes.
Using a level locate any uneven floor and/ or wall areas where your vanity will be installed. Unevenness can cause your vanity to become
misaligned resulting in twisting of the cabinet. Repair any uneven areas by reducing high spots or shimming low spots.

TOOLS REQUIRED

NOTE: Tools are not included.
Sealant

PACKAGE CONTENTS

Level
B
A
Part Description
A Vanity with top
B Backsplash
Quantity
5
Please contact 1-800-998-7021 for further assistance.
1
1
HOMEDEPOT.COM/HOMEDECORATORS