Table of Contents
Advertisement
Available languages
Available languages
How to Attach Slicer/Shredder Accessory (cont.)
4. Insert Housing Pin straight
into Power Hub Opening,
aligning Tab on Housing with
Tab Opening near Power
Hub Knob. Turn Power Hub
Knob clockwise to tighten
and hold Accessory in place.
How to Disassemble:
1. Before removing Housing, make sure Stand Mixer is unplugged and Stand Mixer Speed Control Dial is set to OFF ( ).
2. Carefully turn Cone counterclockwise to remove. While holding Housing, unscrew Power Hub Knob counterclockwise, then turn
Housing counterclockwise to remove. Lower Power Hub Cover and turn Power Hub Knob clockwise to lock.
5. While holding Cone at
opening end, insert Cone
straight into Housing.
Carefully, turn Cone
clockwise to secure
in place.
6. Plug Stand Mixer into outlet.
7. Cut food to fit into Food
Chute and place a large bowl
under Housing.
w CAUTION
Cut Hazard. Unplug
before inserting or removing parts.
Keep fingers away from cone and
out of feed chute. Always use food
pusher.
8. Add food to Food Chute and
use Food Pusher to push
food into Slicer/Shredder.
Select speeds 1-3 on Stand
Mixer.
9. When finished shredding
or slicing, turn Stand Mixer
Speed Control Dial to OFF
( ) and unplug.
5
Advertisement
Table of Contents
