Table of Contents
Advertisement
Quick Links
LIMITED WARRANTY
The manufacturer guarantees that this unit is free from defect in
materials and workmanship when it leaves the factory and
undertakes to replace or repair the unit if it proves defective in
normal use or during servicing for a period of 1(one) year. The date
of original installation and is for the benefit of the original purchaser
only. The liability under this warranty is limited to repairing the
defective unit or any part of the unit provided it is sent carriage paid
to an authorized dealer. All other Warranties ,expressed or implied
, statutory or otherwise, including without limitations any implied
Warranty of Merchantability or fitness for purpose are excluded .The
Seller shall in no event be liable for direct,indirect or consequential
damages in connection with the products.
This unit is at all times to be used according to the instruction manual
and for its normal purpose.
This Warranty is not effective if damage occurs because of accident,
carelessness,improper installation,lack of proper set-up,supervision
when required or if the equipment is installed or operated in any
manner contrary to the installation and operating instructions. In
these cases,repairs will be made at a reasonable cost. Work
performed by unauthorized personnel or unauthorized service
agencies voids this Warranty.
4-INS-701
ULTRASONIC CLEANER
INSTALLATION OPERATION AND CARE OF
ULTRASONIC CLEANER
MODELS: 701, 702, 703, 704 and 705
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ScienTECH 701
- Page 1 In these cases,repairs will be made at a reasonable cost. Work performed by unauthorized personnel or unauthorized service agencies voids this Warranty. INSTALLATION OPERATION AND CARE OF ULTRASONIC CLEANER MODELS: 701, 702, 703, 704 and 705 4-INS-701...
- Page 2 UNPACKING Unpack the product and check for any damage incurred during transit. This should be reported to the responsible carrier, railway or postal authority, and a request for a damage report should be made. THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR PROTECTING AGAINST LOSS FROM CONCEALED DAMAGE.
- Page 3 WIRING DIAGRAM 3. TIMER SETTING : MODEL: ULTRASONIC CLEANER Press “MODE” once and the “SET TIME” indicator lamp will MODEL CODE: 702, 703, 704, 705 illuminate. The display will show “060” indicating 60 minutes. time may be adjusted via the up and down arrow keys. LEGEND DESCRIPTION from 0 to 60 minutes.
- Page 4 WIRING DIAGRAM ELECTRICAL CONNECTION INFORMATION MODEL: ULTRASONIC CLEANER MODEL CODE: 701 MODEL CAPACITY VOLTS POWER TEMP RANGE (Litres) (V /Hz) (°C) FITTED LEGEND DESCRIPTION 230/50 AMB +7°c to ROCKER SWITCH 80°c TRANSDUCER 230/50 AMB +7°c to PC CONTROL BOARD 80°c...
- Page 5 POSITIONING DIAGRAM ULTRASONIC CLEANERS CLEANING MODELS 703, 704, 705 1. Always ensure that the unit is disconnected from the main power supply before cleaning. 2. This unit should not be cleaned with a water jet or immersed in water. Use only a damp cloth or sponge dipped in soapy water.
- Page 6 POSITIONING DIAGRAM SAFETY ULTRASONIC CLEANERS MODELS 701, 702 READ ALL INSTRUCTIONS BEFORE USE. FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN INJURY TO YOURSELF AND OTHERS Use the Ultrasonic cleaner on an individual 15A mains outlet only. DO NOT OVERLOAD THE CIRCUIT.
Need help?
Do you have a question about the 701 and is the answer not in the manual?
Questions and answers