Page 1
User Manual for CEN102HD User Manual CEN102HD Mobile Digital Video Recorder Copyright 2013-2015, Centrad All Rights Reserved www.centrad.co.uk For more information, please visit our website...
Page 2
Under copyright laws, the content of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine- readable form, in whole or in part, without prior written consent of Centrad Ltd. Copyright 2013-2015) www.centrad.co.uk...
Page 3
User Manual for CEN102HD Guarantee & Warnings 1) Electrical Apparatus Safety All installation and operation should comply with local electrical safety norms. 2) Transportation In the process of transportation, storage and installation, please avoid heavy stress, violent vibration, impact and water splashing.
1. PRODUCT CHARACTERISTICS 1.1. OVERVIEW CEN102HD is an advanced and function-extensive Mobile Video Recorder specially designed for network high definition, analog audio & video input and excellent extension. It uses high-speed processor and embedded operating system, combining with H. 264 video compression / decompression technology, network technology and GPS locating technology.
User Manual for CEN102HD 1.4. SPECIFICATIONS Preview, Recording, Playback, Network, Locating Function Overview Linux 3.0.8 System Control Mode CP4, Easy Check, IR Remote Control, Network,Mouse 8channel WD1+4channel IPC(720P) or Input 4channel WD1+8channel IPC (720P) Output 2 channels (8 x 25)FPS WD1 @ PAL / (8 x 30)FPS WD1 @ NTSC +(4 x...
User Manual for CEN102HD RS232 RS232 X 2 RS485 RS485 X 2 Sensor 8 inputs, 2 outputs Serial G-sensor (Internal) Speed 1 channel pulse speed detection Interface Interface (CP4) Optional Input DC8-36V Power Output 1A@12V,1A@5V Dimension(L x W x H) 292.5x215x91.6mm (including shelf and back cover)
Page 8
User Manual for CEN102HD Diagram 2 ( POE Switch Aviation-din) - 45 www.centrad.co.uk For more information, please visit our website...
User Manual for CEN102HD 1.6. EXTERNAL INTERFACE 1) Dimension (Unit: mm) 2) Front Panel and Rear Panel - 45 www.centrad.co.uk For more information, please visit our website...
Page 10
User Manual for CEN102HD Interface Name Description ① Hard disk box ② SIM slot & SD card slot SD card for mirror recording ③ Audio/Video output To connect monitor ④ Lock Hard disk lock ⑤ IR receiver Works with remote controller ⑥...
Page 11
User Manual for CEN102HD Interface Name Description ① 3G/4G antenna 3G/4G female port ② GPS antenna GPS female port ③ Wifi antenna Wi-Fi female port ④ Debug Debug port for engineer ⑤ CAN port Reserved ⑥ Audio/Video input ⑦ Power input DC8-36V ⑧...
User Manual for CEN102HD 1.7. DESCRIPTION 3G/4G port 3G antenna GPS port GPS antenna Wi-Fi port WiFi antenna A/V port DB44 wire - 45 www.centrad.co.uk For more information, please visit our website...
Page 13
User Manual for CEN102HD Signals: AV IN1 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN2 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN3 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN4 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN5 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN6 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO AV IN7 (black:GND) red:+12V/0.5A,white:AUDIO,no color:VIDEO...
Page 14
User Manual for CEN102HD Signal: Remarks: After short circuit, PIN 1 and PIN 2 of aviation head connect with red wire PIN 3 of aviation head connects with yellow wire After short circuit, PIN 6 and PIN 7 of aviation head connect with black wire...
Page 15
User Manual for CEN102HD Hard disk USB port USB wire Signal: - 45 www.centrad.co.uk For more information, please visit our website...
User Manual for CEN102HD 2. SETTING 2.1. CP4 CONTROL PANEL Repeat station notification Repeat Station Notification Station notification bottom Number enter key Confirmation Confirmation key Back Back from the menu Direction Up / Down / Left / Right selection key...
User Manual for CEN102HD When using Android pad, you need to select vehicle number, as when insert the wifi hot spot to USB port of the 4120, the hot spot will get the vehicle number and change its SSID to vehicle number.
User Manual for CEN102HD Language: Support the language switch. "language" (Lang) means the current interface adopts Chinese; It will automatically switch once Selecting the language. Currently, it supports Chinese and English; After switching languages, it will not restore language option when user restores the factory Settings;...
Page 19
User Manual for CEN102HD Video search interface contains video file search, video data backup and video playback function. When there is a hard disk or SD card, enter the video search interface. Following is the REC Search interface: In the calendar, the color below the dates means: No color means no video.
Page 20
User Manual for CEN102HD Note: channel number is displayed from 1~20, please up page up/page down button to change channel Button description Video playback: Choose the channel No., select start time to play < default start from 0 >, click the playback button to playback the video.
User Manual for CEN102HD User can also pull out the hard drive or SD card, export and playback the video by professional software. 3.3. LOG SEARCH AND EXPORT In the log search interface, it records and displays all alarm events and login operation log. Enter the "log query”, the interface will be shown as following :...
User Manual for CEN102HD Log types: classification of log search, including the operation log and alarm log and locking log Operation log search interface instruction Log includes the following information: Log time: the time when event is triggered ...
Page 23
User Manual for CEN102HD System- Version information System- Modules System-Server status System - Environment - 45 www.centrad.co.uk For more information, please visit our website...
User Manual for CEN102HD System-Storage: 3.5. BASIC SETUP Click setup button and enter the following interfaces: 3.5.1. REGISTER INFOMATION (SETUP VEHICLE INFORMATION) Register information-Device info: Device ID: Currently, it is not useful. Register information- Vehicle info - 45 www.centrad.co.uk...
User Manual for CEN102HD Vehicle Number:When connected with PAD, the vehicle number is needed. Vehicle plate:Input manually. Line number:Input manually. Register information—About the driver’s information: Driver number: Input manually. Driver name: Input manually. 3.5.2. TIME SETUP ...
User Manual for CEN102HD Date format: Setup the date format of device Time format: 24 hours or 12 hours Time zone: Range from -12 district ~ +13 district Time-Time Sync Date/Time: Device time, from 2000-01-01 to 2037-12-31 ...
Page 27
User Manual for CEN102HD ON/OFF mode: 3 modes, including ignition, timer and ignition or timer. Ignition: Input ignition delay time for shutdown delay function Timer: When setup the start mode as Timer, please setup the start time and end time Under this mode, MDVR’s start up or shut down time will not affect the ignition.
User Manual for CEN102HD platform after it is ticked. 3.5.4. USER SETTING In the basic settings, click user settings, enter the following interface, user can enter setting menu. User name: The default ones are admin and user. User Group: It is divided into administrator and ordinary user.
User Manual for CEN102HD Modify the user name and password to confirm the operation temporarily. There is no need to verify the old password, Administrator user name can no t be modified. 3.5.5. NETWORK SETTINGS In the basic settings, click Network Settings, enter the following interface, user can set network parameters.
Page 30
User Manual for CEN102HD WEB port No.: The default is 80, will be used in IE to access this port. Media Port No.: The default is 81, the forwarding server will use this port. Net working settings- Instruction of wifi network:...
User Manual for CEN102HD No Service. When entering the dialing setup interface, it search the wireless module type automatically. It shows No Service when ther is no module. Network type: The default one is Mix, 2G/3G ot 2G/3G/4G optional.
Page 32
User Manual for CEN102HD Audio: Enable the audio when live view the video Image Setting: Set the live-view parameters, including brightness, contrast, etc. Splash Screen: Set the live-view screen, it can be single-screen or quad screen or nine screen ...
User Manual for CEN102HD Total bandwidth: Set the bandwidth, default is 500Kbps maximum 5M Transmit mode: Default is the recommended (smooth + clear) mode, divided into five level. Live-view OSD Setting Interface: Display the information on screen, default is only the time, and the position can not be set.
Page 34
User Manual for CEN102HD Overwrite: Enable the HDD to be overwritten when it is full Lock file retention: Protect the record file to be deleted by fault, default is 7 days Pre-recording: Pre-record before the alarm happens. Default is 15min, 0-60min optional.
User Manual for CEN102HD Parameters includes channel number, enable or not, audio, resolution, frame rate and image quality Can’t record I frame only, record parameters is completely separated from main stream. Remark: Main stream +sub-stream total resource can’t over 12M ...
User Manual for CEN102HD Setup: Search and edit IP camera recording parameters Fast setup: Search all the IP cameras in LAN network, and auto assign IP address to IP camera 4.4. DATA COLLECTION GENERAL General- IO sensor ...
User Manual for CEN102HD General- speed Unit: KM/H and MPH selectable. Source: GPS, pulse or both optional. Calibration mode: No need to calibrate if setup as satellite mode. 4.5. ALARM GENERAL General --Speed alarm - 45 www.centrad.co.uk...
Page 38
User Manual for CEN102HD Name: The current name is Overspeed Enable:Enable or disable, tick to enable Alarm type: 3 levels Trigger: Low or high voltage to trigger alarm Linkage: When alarm triggered, link to alarm output, full screen live video, report to server and so on ...
User Manual for CEN102HD CH:Associate recording, optional Post-recording:When the alarm is canceled, the time continue to record Lock:Only for alarm video 3G Network: It means when the alarm triggered, should it active the 3G module to dial or not.
User Manual for CEN102HD “IMPORT” to import the parameters, and it will display the notice when import success. Remark: it won’t import the register info and speed adaption info. 4.6.2. DATA EXPORT In the Data export page, you can export the appointed file in any time, such as black box data, log file and so on.
User Manual for CEN102HD 4.6.4. STORAGE In this page, user can format all the storage. Storage type: HDD, SD card (Internal), SD card(External), USB drive Free/Total Not exist: Didn’t find the HDD (not install or broken) Unformatted: Means the HDD has been detected, but unformatted.(New HDD) Capacity info: Display the correct info means HDD working fine ...
Page 42
User Manual for CEN102HD Remark: For, language, MAC address, register info, CMS server info, speed adaption parameter will not change during default settings. - 45 www.centrad.co.uk For more information, please visit our website...
User Manual for CEN102HD 5. REFERENCE APPENDIX 5.1. STORAGE CAPACITY CALCULATION Image Quality & Streams Image Stream 2048 1536 1230 1024 (Kbps) 1280 Record File Size Calculation Rec. file size for each channel is: Recording time (s) x Stream (Kbps) / 8 / 1024 = File Size (MB) e.g.
Page 44
If the device has been set with schedule recording, it can’t shutdown if it is still during recording time of the task table. Which IP waterproof level does the device support? CEN102HD support waterproof IP 54. How to install the WIFI antenna? The antenna must be installed on unobstructed place of the roof, and be fixed with glue.
Page 45
User Manual for CEN102HD 10) GPS anomaly. Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPS antenna pedestal on the back of the MDVR device. Check if the antenna connector is blocked and make sure the antenna connector not be covered by other things.