HSS Hire 56842 Operating & Safety Manual

Floor Model
Lock
Lever
Supply Lead
Connection
Now choose the direction of the air-flow in both
the horizontal and vertical plane by loosening the
appropriate lock nut lever (see diagram).
On some models the supply lead may require
connecting to the fan unit.
Plug the unit into its power supply, switch ON and
adjust the speed as required.
Fan speed is controlled by either turning a speed
control dial or pressing the appropriate speed
selection button (see diagram).
Where a single control is fitted, press and hold
until the fan reaches the desired speed. To switch
OFF , simply press the button once.
On some models it is possible to oscillate the fan
head to sweep an air-flow from side to side. Before
selecting this option, ensure the fan' s path of
travel will not be obstructed.
To start the oscillation, lightly pull up the oscillation
Fan Speed
control, to stop simply push the control back.
ON / OFF
Control
Do remember that the air-flow will disturb dust,
Button
litter and possibly someone' s carefully prepared
paper work, so ... think before you switch ON!
EQUIPMENT CARE
If the model of cooling fan is not giving sufficient air-
flow, either, hire a larger model or additional fans.
When not in use store the fan somewhere clean,
dry and safe from thieves.
FINISHING OFF
Switch the fan OFF and where applicable, lower
and adjust the fan position.
Neatly coil the cable ready for return to your local
HSS Hire Shop.
©HSS Hire Service Group Plc 1997 No. 613/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Contact your local
0990 282828
Operating & Safety Guide 613
Hire Shops
Cooling Fans
Powerful, yet portable electric fans
for industrial and office use.
Code 56842/51/61