Table of Contents
Advertisement
Storage
Š
Š
Š
Š
Š
Š
Š
Š
SAS
Š
Internal
Š
Connectors
Š
Š
Š
Š
Š
Š
Š
Š
Front Panel
Š
LED/Buttons
Š
Š
Š
Š
Š
Š
Š
Rear Panel I/O
Š
Š
Š
Š
Š
Š
Backplane I/O
Š
Š
Š
Š
Š
Š
TPM
Š
Š
Front side: 16 x 2.5" SATA/SAS ports, 8 x 2.5" SATA/SAS/Gen4 NVMe hybrid ports
Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( Connected via
SAS Expander)
SAS card is required for SAS devices support
Broadcom SAS35x36R expander
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
Default configuration supports:
8 x 2.5" NVMe drives, non-supported SATA/SAS drives without SAS card
Suggested 12Gb/s SAS cards: CRA4448
Supported via add-on SAS Card
2 x CPU fan headers
1 x USB 3.0 header
1 x TPM header
1 x VROC connector
1 x Front panel header
1 x HDD back plane board header
1 x IPMB connector
1 x Clear CMOS jumper
1 x BIOS recovery jumper
2 x USB 3.0
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED
1 x HDD activity LED
2 x LAN activity LEDs
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED
2 x USB 3.0
1 x VGA
1 x COM (RJ45 type)
2 x RJ45
1 x MLAN
1 x ID button with LED
1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010
- 11 -
Hardware Installation
Advertisement
Table of Contents
