Advertisement
Table of Contents
How to Connect the O3Elite Ozone
Generator to the Water Bubbler/
Humidifier Combo
Step 1. Remove stem from flask.
Step 2. Fill flask with desired amount of water and put stem back in
flask. If humidifying, you only need 300ml. If ozonating water, fill to
desired amount.
Step 3. Connect silicone hose with male Luer lock to Ozone Out port of
Ozone Generator.
www.promolife.com
888-742-3404
Advertisement
Table of Contents
Related Manuals for Promolife O3Elite
Summary of Contents for Promolife O3Elite
- Page 1 How to Connect the O3Elite Ozone Generator to the Water Bubbler/ Humidifier Combo www.promolife.com 888-742-3404 Step 1. Remove stem from flask. Step 2. Fill flask with desired amount of water and put stem back in flask. If humidifying, you only need 300ml. If ozonating water, fill to desired amount.
- Page 2 888-742-3404 Step 4. Take opposite end of silicone tubing with no connectors and attach to connector on middle stem (left). Step 5. Take the 3 ft silicone hose segment that comes with the PL22 and connect to the other hose connection on the stem.
- Page 3 888-742-3404 Step 7. To properly use the Destruct System while making ozonated water or priming water for humidification, ensure the valve on the Destruct System has the Off position pointing toward the port side of the valve. Step 8. If using for humidifying, attach the desired application to the side accessory port on the Destruct System.
Need help?
Do you have a question about the O3Elite and is the answer not in the manual?
Questions and answers