TO REGULATE THE LENGTH OF STITCH
Most sewing will be done with the maximum stitch length. However, the length of the
stitch can be adjusted as follows:
1.
Loosen the thumb nut on the stitch length lever.
2.
Raise the stitch length (feed regulator) lever until the desired stitch length is
obtained.
3.
Tighten the thumb nut.
REVERSE SEWING
To sew in reverse:
1.
Lower the feed regulator (stitch length) lever all the way to the bottom of the slot
in the stitch length plate.
2.
Hold the lever there until reverse sewing is completed.
3.
Then return the lever the forward position.
6
5
4
3
2
FORWARD FEED
REVERSE FEED
1
0
06