Table of Contents
Advertisement
Available languages
Available languages
STEP 2
Turn the control knob to the LOW
position and leave it there for at least
5 minutes. You may then turn the knob
to the desired temperature setting.
RE-LIGHTING
If the burner flame goes out, turn off the heater and wait at least 5 minutes
or more to let the gas dissipate before re-lighting to avoid a gas explosion.
Repeat the Lighting steps on the prior pages.
If you experience any ignition problems, consult the Troubleshooting section.
SHUTTING DOWN
Turn the propane cylinder valve clockwise to OFF, disconnect the regulator
and place the dust cap on the cylinder when the heater is not in use.
24 | www.bluesk youtdoorliving.com
Advertisement
Table of Contents
