RTC Battery Removal
Prerequisite:
1. Locate RTC battery (D) on mainboard. Refer to
2. Remove tape (A). (Figure 3-23).
Figure 3-23. RTC Battery Removal
3. Disconnect RTC battery cable (B) from mainboard connector (C).
4. Remove RTC battery (D).
+
IMPORTANT:
RTC Battery Installation
1. Install RTC battery cable (B) to mainboard connector (C). (Figure 3-23)
2. Place RTC module (D) on mainboard.
3. Install tape on top of RTC battery.
4. Install lower cover.
Machine Maintenance Procedures
Lower Cover Removal
D
Follow local regulations for battery disposal.
Figure
3-20.
A
C
B
0
0
3-25
Need help?
Do you have a question about the TravelMate 5760 and is the answer not in the manual?