Centon C Series Installation Manual

For more information, please visit centon.com
For more information, please visit centon.com
C-Series SSD Drives
SSD Migration Software
Thank you for purchasing Centon's SSD Notebook upgrade kit. All hardware
and software necessary to replace your internal hard drive with your new
Solid State Drive (SSD) has been included in this kit. The software provided
will copy all the content from your current hard drive and load it onto the
new SSD drive. Once this process is complete, your hard drive can then be
used as an external USB drive for extra data storage.
*Note: If the drive you are replacing is larger than your new SSD drive, the
software provided with this kit will allow you to exclude content from copying
in order to fi t the destination disk. In the event that you are copying from a
smaller drive, the software will allow you to choose whether or not to use
the entire SSD drive for the copying process or to split the disk into multiple
partitions/drives.
System Requirements
• Operating System: Windows XP
or Higher
• Pentium Processor or higher
• 128MB RAM
• CD-Rom Drive
• Available USB Port
* If any pieces of your kit are missing, please contact your point of purchase immediately.
C-Series SSD Drives
SSD Migration Software
Thank you for purchasing Centon's SSD Notebook upgrade kit. All hardware
and software necessary to replace your internal hard drive with your new
Solid State Drive (SSD) has been included in this kit. The software provided
will copy all the content from your current hard drive and load it onto the
new SSD drive. Once this process is complete, your hard drive can then be
used as an external USB drive for extra data storage.
*Note: If the drive you are replacing is larger than your new SSD drive, the
software provided with this kit will allow you to exclude content from copying
in order to fi t the destination disk. In the event that you are copying from a
smaller drive, the software will allow you to choose whether or not to use
the entire SSD drive for the copying process or to split the disk into multiple
partitions/drives.
System Requirements
• Operating System: Windows XP
or Higher
• Pentium Processor or higher
• 128MB RAM
• CD-Rom Drive
• Available USB Port
* If any pieces of your kit are missing, please contact your point of purchase immediately.
Kit Includes*
• 2.5" Solid State Drive
• USB 3.0 Enclosure
• USB 3.0 Cable
• SSD Migration CD
• Quick Install Guide
• Phillips Head Screw Driver
Kit Includes*
• 2.5" Solid State Drive
• USB 3.0 Enclosure
• USB 3.0 Cable
• SSD Migration CD
• Quick Install Guide
• Phillips Head Screw Driver