Cardinal Gates XpandaGate Assembly Instructions

ASSEMBLY INSTRUCTIONS
2X
1
1. Attach mounting
brackets to top sides
of gate.
(You will hear a
click when it is seated.)
8X
3
C
D
3. Drill holes (C) for plastic anchor (into
drywall) or pilot hole (for wood
mounting). Insert plastic anchors into
drywall, if applicable (D).
TIP FOR
ASSEMBLY,
DISASSEMBLY
AND ADDING
EXTENSIONS
1. Depress button
lock with blunt
ended tool like a
screwdriver.
2. Pull mounting
bracket off gate.
NEVER USE TO KEEP CHILD AWAY FROM POOL.
XPANDAGATE - MODEL EX100
FOR OPENINGS 30" (78cm) - 100" (254cm)
8X
2
A
B
NOTE: For maximum stability, install in a zig zag pattern. (
2. Expand gate to fit opening and mark for mounting all four (4)
mounting brackets (A). Bottom mounting brackets can slide up to
mount above baseboard if needed (B), but mount as close to floor
as possible for maximum stability.
4
GATE IS RECOMMENDED FOR CHILDREN BETWEEEN 6 AND 24 MONTHS.
INCLUDED:
TWO (2)
MOUNTING
BRACKETS
8X
E
F
6X
4.
Install gate with 1" screws (E). Position gate
into final desired angles. Screw tight all six (6)
joints (F) counterclockwise to tighten.
GATE OPERATION
TO OPEN
Slide button back
with thumb
and lift gate
to open.
TO CLOSE
Push gate shut.
Listen for "CLICK"
to ensure gate is
locked.
EIGHT (8)
EIGHT (8)
DRYWALL
1" SCREWS
ANCHORS
Max span in 100"
)