Summary of Contents for MacAllister MTC650
- Page 1 650W Tile Cutter MTC650 EAN: 3663602797913 WARNING! Read the instructions before using the product!
-
Page 2: Table Of Contents
MTC650 by MacAllister Let’s get started… These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Your product Technical and legal information Before you start detail... more Product functions... -
Page 3: Your Product
Your product MTC650 by MacAllister Your product 1. Upper protective guard 11. Parallel cutting guide 2. Cutting disc 12. Locking knob 3. Vertical fence (for mitre cutting guide) 4. Scale 13. Metal bracket 5. Working table 14. Locking knob 6. On/Off switch (for upper protective guard) 7. - Page 4 Your product MTC650 by MacAllister Safety devices Metal bracket The metal bracket (13) prevents a workpiece being caught by the cutting disc (2) and being hurled at the operator. The metal bracket must always be mounted during operation. Upper protective guard The upper protective guard (1) prevents accidental contact with the cutting disc (2) and stops workpiece parts and cooling water from being flung out.
-
Page 5: Technical And Legal Information
Technical and legal MTC650 by MacAllister information Technical specifications General > Input Voltage 220-240V~50Hz > Power Input 650W > No Load Speed 5500min > Insulation Class Class I > Diamond Disc Size ø180mmx2.4mmxø22.2mm > Table Size 345x345mm > Table Size (with Extension Table) 400x640mm >... - Page 6 Technical and legal MTC650 by MacAllister information as Respirable Crystalline Silica or RCS) during many common tasks such as cutting, drilling and grinding Breathing in very fine particles of crystalline silica can lead to the development of: Lung cancer Silicosis Chronic Obstructive Pulmonary Disorder (Chronic obstructive...
- Page 7 Technical and legal MTC650 by MacAllister information a power tool can be used safely on a daily basis and the choice of tool. SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL. The declared vibration emission value should be used as a minimum level and should be used with the current guidance on vibration.
- Page 8 WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Designation of the tool (M - MacAllister, TC - Tile cutter, 650 - 650W) MTC650 Safety warnings...
- Page 9 Technical and legal MTC650 by MacAllister information SAVE THESE INSTRUCTIONS 1. Keep the work area clean. > Cluttered and dark areas invite accidents. 2. Consider work area environment. > Do not expose power tools to rain. Do not use power tools in damp or wet locations.
- Page 10 Technical and legal MTC650 by MacAllister information 14. Maintain tool with care. > Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if damaged have them replaced by an authorised service facility. Inspect extension cords periodically and replace if damaged.
- Page 11 Technical and legal MTC650 by MacAllister information with, this dust can be particularly harmful to you (e.g. lead from old gloss paint). You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure. You should: - Work in a well-ventilated area.
- Page 12 Before you start MTC650 by MacAllister Unpack > Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
-
Page 13: Before You Start
Before you start MTC650 by MacAllister > Unplug the tile cutter from the mains supply. > Raise the vertical fence (3) approx. 45° and remove. Fig. 1 > Loosen cross-screws (19) with the Phillips screwdriver (not supplied) and pull off lower protective guard (17). - Page 14 Before you start MTC650 by MacAllister Fig. 3 > Place cutting disc (2) on inner flange (24). > Attach the outer flange (22). > Screw hexagon nut (21) onto motor shaft (25) clockwise. > Attach the straight spanner (20) to the hexagon nut (21).
- Page 15 Before you start MTC650 by MacAllister Assemble/adjust metal bracket WARNING: Product damage! The metal bracket must always be aligned parallel to the cutting disc. > Unplug the tile cutter from the mains supply. > Raise the vertical fence (3) approx. 45° and remove.
- Page 16 Before you start MTC650 by MacAllister Mounting the upper protective guard to the metal bracket WARNING: Product damage! Do not over-tighten socket head bolt (27) and locking knob (14). The upper protective guard (1) must be free to rise and fall as the workpiece is pushed towards the cutting disc.
- Page 17 Before you start MTC650 by MacAllister Mounting the extension table > Unplug the tile cutter from the mains supply. > Undo the cross-screws(29). > Push the guide rails for the extension table (9) on both sides into the locator (30) of the machine body.
- Page 18 Before you start MTC650 by MacAllister Mounting the parallel cutting guide > Unplug the tile cutter from the mains supply. > Attach the rear end of the parallel cutting guide (11) to the rear of the working table (5). > Push the spring (31), clamp (32) and washer (33) onto thread (34).
- Page 19 Before you start MTC650 by MacAllister Mounting/setting the mitre cutting guide NOTE: The mitre cutting guide can be set to a desired angle (0°~ 45°). The mitre cutting guide can only be used when the parallel cutting guide is mounted.
- Page 20 Before you start MTC650 by MacAllister Fig. 11 Filling the product with water NOTE: Product damage! Fill the product with water only until water can drain from the opening in the plug. During use the water level must never drop below the MIN marking.
- Page 21 Before you start MTC650 by MacAllister Fig. 12 Check before starting! Warning: Risk of injury! The product must be mounted in a stable position, i.e. on a workbench, a universal subframe or similar. Warning: Risk of injury! As soon as a malfunction occurs, push the red 0-Button on the On/Off Switch and pull out the mains plug.
- Page 22 Before you start MTC650 by MacAllister Connection to the electrical supply > Before switching on, make sure that the voltage of the mains supply is the same as indicated on the rating plate. This product is designed to operate on 220-240V~ 50Hz.
-
Page 23: In More Detail
MTC650 by MacAllister detail… more Product functions Care and maintenance Trouble shooting Recycling and disposal Guarantee EC declaration of conformity... -
Page 24: Product Functions
Product functions MTC650 by MacAllister WARNING! Before switching the tile cutter on, make sure that you have read and understood all of the safety instructions. Make sure also that the machine has been correctly assembled and adjusted. Make sure that the mains is disconnected from the supply when the tile cutter is not being used, or adjustments are being made. - Page 25 Product functions MTC650 by MacAllister WARNING: The disc will continue to rotate for a few seconds after the machine has been switched off. Wait for the disc to stop before removing the workpiece, or making any adjustments. Stop the machine immediately if there is undue vibration or some other fault. If this situation continues, check the machine to find the origin of the fault.
- Page 26 Product functions MTC650 by MacAllister Fig. 13 Making a straight cut Adjust the parallel cutting guide (11) to the desired width. Use the locking knob to loosen or adjust the guide. Position the tile firmly against the parallel cutting guide (11) and pass through the cutting disc in a smooth action.
- Page 27 Product functions MTC650 by MacAllister Making a mitre or diagonal cut Follow the same procedure for a straight cut but use the mitre cutting guide (10) in conjunction with the parallel cutting guide (11). The mitre cutting guide (10) simply clips onto the parallel cutting guide (11).
-
Page 28: Care And Maintenance
Care and maintenance MTC650 by MacAllister The golden rules for care WARNING! Always switch the product off, disconnect it from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! > Keep the product clean. Remove debris from it after each use and before storage. - Page 29 Care and maintenance MTC650 by MacAllister > Raise the vertical fence (3) approx. 45° and remove. > Place a suitable collector below the product's drain opening. > Remove water reservoir plug (16) and drain off all the dirty cooling water.
- Page 30 Care and maintenance MTC650 by MacAllister > Loosen cross-screws (19) and pull off lower protective guard (17). Fig. 18 > Attach the straight spanner (20) to the hexagon nut (21). > Lock motor shaft (25) to prevent turning using angle spanner (23).
- Page 31 Care and maintenance MTC650 by MacAllister Power cord > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a safety hazard. Plug replacement If you need to replace the fitted plug then follow the instructions below.
- Page 32 Care and maintenance MTC650 by MacAllister NOTE: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. If the supply cord is damaged it must be replaced by a service agent or a similarly qualified person in order to avoid hazard.
- Page 33 Care and maintenance MTC650 by MacAllister > We recommend using the original package for storage or covering the product with a suitable cloth to protect it against dust. Transport > Dismantle any components that protrude from the product. > Use the original packaging or transportation handle (located on the left side of the tile cutter cabinet) to ship whenever possible.
-
Page 34: Trouble Shooting
Trouble shooting MTC650 by MacAllister Trouble shooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these... -
Page 35: Recycling And Disposal
Recycling and disposal MTC650 by MacAllister Recycling and disposal > Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. -
Page 36: Guarantee
MTC650 by MacAllister Guarantee At MacAllister we take special care to select high quality materials and use manufacturing techniques that allow us to create ranges of products incorporating design and durability. That’s why we offer a 2 year guarantee against manufacturing defects on our MacAllister power tool products. -
Page 37: Ec Declaration Of Conformity
3 Sheldon Square London W2 6PX United Kingdom Declare that the product 650W TILE CUTTER, MTC650 Serial number: from 000001 to 999999 Complies with the essential health and safety requirements of the following Directives: EC Machinery Directive 2006/42/EC The EMC Directive 2014/30/EU... - Page 38 Manufacturer • Fabricant • Producent • Hersteller • Producător • Fabricante: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom www.kingfisher.com/products Distributor: B&Q plc, Chandlers Ford, Hants, SO53 3LE United Kingdom www.diy.com Screwfix Direct Limited, Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com...