Table of Contents
Advertisement
No
Icon
Description
E-heater:
will be lightened if e-heater is activated,
otherwise
will be extinguished.
If e-heater is automatically activated by unit,
will be lightened;
If e-heater is manually activated,
with 0.5Hz frequency.
When setting e-heater manually ON/OFF,
will flash with 2 Hz frequency.
Disinfect:
will be lightened when the unit is under
disinfect mode, otherwise
will be lightened if disinfect mode is automati-
cally activated by unit;
will flash with 0.5Hz frequency, if disinfect
mode is manually activated;
will flash with 2Hz frequency when setting
disinfect mode or setting disinfect timer.
High temp. Alarm
If setting water temp. is higher than 50
will be lightened, otherwise
extinguished.
Alarm:
When unit is under protection/error,
with 5Hz frequency as well as buzzer will sound
3 times every 1 minute until protection/error
eliminated or press
Lock:
If button is locked,
otherwise
will be extinguished.
Temperature unit
If setting temperature unit as celsius,
lightened,
If setting temperature unit as Fahrenheit,
be lightened,
Press
for 10sec, it will change between
and
.
Invalid
1 1
If button is under lock mode, press any button
Invalid
except unlock button,
:
will be lightened if screen is unlocked.
It shows water temperature on normal;
It shows remaining vacation days on vacation;
12
It shows setting temperature on setting;
It shows unit setting/running parameters,
error/protection code on querying.
Reserved
13
Setting
14.1
will be lightened when setting water
temperature or setting days for vacation.
Date setting
will be lightened when setting days for
14.2
vacation;
will be lightened when on vacation.
will flash
will be extinguished.
will be
will flash
for 1 second.
will be lightened,
will be
will show celsius degree;
will
will show Fahrenheit degree.
will be lightened.
Invalid
No
Icon
Description
Timer
There are six timers can be set.
If anyone of them has been set,
will lighten the corresponding one when
screen is unlocked
15
If there is none of timers has been set, it will
keep extinguished.
If timer is being set,
corresponding one with 2Hz frequency as
well lighten the timer which has been set.
Clock and clock setting
16
Whenever there is any setting for clock,
Any press of button is effective only under button and display
unlocked state.
No.
Icon
Description
Manually turn E-heater ON
If E-heater is OFF, follow these steps below to
manually turn it on.
Icon
Confirm manually turning E-heater on,
1
then E-heater is activated to heat up water
to the target temperature. After that, if
12
need manually turn E-heater on again,
please repeat these steps.
If E-heater is already ON, Press
to show invalid icon
Long pressing the
shift to set the temperature display unit from "F" to
"C" or from "C" to "F". The default is "C"(when it's
shifted to display "F", it still will display "C" while
querying).
INCREASE
If screen is unlocked, corresponding value will
increase by pressing
When setting temperature, press
1s, Temperature value will be increased continu-
ously;
2
When Setting clock/timer, press
1s, Clock/timer value will be increased continuously;
When setting vacation days, press
than 1s, day value will be increased continuously;
On querying, check items will page up by pressing
.
will flash the
shows the clock.
will be lightened.
Table.5-2
will flash.
will lead
on the display.
Invalid
button for 10s then can
.
more than
more than
more
Fig.5-3
13
Advertisement
Table of Contents
