Overhead Dome Lights - Advent ADV100P Operation Manual

Turning the ADV100S/ADV100P On or Off
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen
downward until a comfortable viewing angle is reached. The internal friction will hold the screen in position while
the system is in use.
2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use
the internal backlighting will illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to
optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD Panel to the locked position when not in use.

Overhead Dome Lights

The lights integrated into the ADV100S/ADV100P are
controlled by a three position slide switch. Sliding the
switch to the ON position will turn the lights on. The
OFF position will prevent the lights from turning on at
all times, and the AUTO position will allow the lights to
turn on and off with the vehicle's interior lighting. Refer
to the Installation Manual for the wire connections. Do
not leave the vehicle unattended with the dome light
switch in the ON position, as this could result in a
discharged battery.
PO W ER PL A Y ST O P
ON OFF AUTO
- -
12
EJ EC T
Dome Light
Switch
128-7316
12 of 26