Care And Cleaning - AEG LAVATHERM T8DHE842B User Manual

Table of Contents

Advertisement

16
www.aeg.com
4. Touch the Start/Pause button
repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Maximum
dryness
Extra dry-
ness
Standard
dryness
5. To memorise the setting touch and
hold down the Dryness and
Anticrease buttons at the same time
for approximately 2 seconds.
10.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the

11. CARE AND CLEANING

11.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
Display symbol
Filter
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down Anticrease
and Time Dry buttons at the same
time.
One of 2 configurations is possible:
• the Tank indicator:
symbol
water container indicator is
permanently activated
• the Tank indicator:
symbol
water container indicator is
permanently deactivated
3. Use a moist hand to clean both parts
of the filter.
is on if the
appears - the
is off if the
appears - the

Advertisement

Table of Contents
loading

Table of Contents