Advertisement
Assembly (continued)
7
Assembling the cylinder
□ Put the cylinder into the Gas Tank Support (K), and
secure the cyliner by tightening the screw in the
gas tank support. Connect the hose and regulator
to the cylinder.
NOTE: The propane cylinder is sold separately.
Use a standard 20 lb. propane cylinder only.
Put the hose away from the bowl base during
connect the propane cylinder.
8
Installing the AAA battery
□ Open the igniter and place the AAA battery (DD) into
the igniter. Then tighten clockwise.
Put the Cover (L) on the fire pit table when it is
NOT in use or after use, after the fire pit has
cooled down COMPLETELY.
10
Igniter
Advertisement
