Bush Hog TOUGH 70 Specifications

Bush Hog
®
70 & 90 Rear Mounted Blades
BUsH HOG TOUGH FeaTURes
®
TOUGH Heavy Duty Main Frame
TOUGH High strength Reinforced Moldboard
TOUGH Tubular Construction
TOUGH a Frame Construction
TOUGH Double strap Hitch
TOUGH Reversible Cutting edge
TOUGH Heavy Duty King Pins
TOUGH Powder Coat Paint
MODels
Moldboard Widths
approximate Weight
Maximum Tractor HP
Type Hitch
Moldboard Height and Thickness
Moldboard Cutting edge
King Pin Diameter
Tilt adjustment
Offset adjustment
angle adjustment
Blade Parking stand
Options
Warranty
FeaTURes
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
TOUGH
70
6, 7 & 8 ft
510 lbs (6 ft),
538 lbs (7 ft) 572 lbs ( 8 ft)
70 PTO (2WD) 55 PTO (4WD)
3 Point Cat. I & II & Quick Hitch
18 inches x
5/16
x 6 inches, Reversible
1/2
1 inches (Grade 8 Bolt)
1/4
5 Positions Up to 30°
18 inches Left or Right
5 Forward Positions
Up to 45°
5 Reverse Positions
Up to 30°
Standard
Ratchet (Offset)
Hyd. Cylinder Kit (Offset)
Standard Parking Stand, 70 Series Available in major tractor colors, 90 Series Available in Red Only
90 series Blade
90 PTO (2WD) 70 PTO (4WD)
or Cat. II Quick Hitch
inches 16 inches x
1/2
30 inches Left or Right
Right in Rev. Position
1 year limited warranty
70 series Blade
90
8 ft
740 lbs
3 Point Cat. I, II
inches
3/8
x 6 inches, Reversible
3 inches
15° Left or Right
15°, 30°, 45° Left
or Right in Forward
Position, 20° Left or
Standard
Skid Shoes,
End Plates