Lonsdor Toyota smart key Quick Start Manual

Toyota smart key：
Product Features:
Working voltage:
1、
Frequency range:
2、
3、Working range:
Power consumption: ≤ 0.024mW
4、
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety should always be followed.
Read and familiarity yourself with all operating instructions before using your
Before using your Toyota smart key, visually check that the unit is intact and
has not suffered any transit damage.
Never allow children to play with the Toyota smart key. Small parts may be a choking hazard.
Do not use these headphones for anything other than its intended use.
Do not immerse the Toyota smart key in water or any other liquids.
Do not expose the Toyota smart key to moisture, rain or humidity, as it is not waterproof.
Never clean the Toyota smart key with solvents or harsh or abrasive cleaners.
Do not attempt to dismantle the Toyota smart key, it does not contain any user serviceable parts.
Whilst not in use, store the Toyota smart key in a cool dry place free from extreme temperatures,
humidity or dust.
Operation
1. Our Toyota Smart Key currently only supports ID8A chips, and does not support 4D.
2. Please install the battery of CR2032 before use and make sure the battery is fully charged.
3. Toyota smart card can be matched with the corresponding car by using the car matching
device.
4. After matching the car, it can achieve the same function as the original car key.
5. Toyota smart card model can be selected by judging frequency and P4 page information.
CR2032 3.0V
433.50mHZ
meters
40