Bush Hog TOUGH 121 Specifications

Bush Hog TOUGH
®
121 & 176 Rear Mounted Blades
BUsH HOG TOUGH FeaTURes
®
TOUGH Heavy Duty Reinforced Moldboard
TOUGH Reinforced High strength Hitch
TOUGH Heavy Duty King Pin
TOUGH Heavy Duty Mainframe
TOUGH Double strap Hitch
TOUGH Powder Coat Paint
176 series Blade
121 series Blade
121 176
MODels
8 and 9 ft 9 and 10 ft
Moldboard Widths
885 lbs (8 ft), 910 lbs (9 ft) 1381 lbs (9 ft), 1408 lbs (10 ft)
approximate Weight
120 PTO (2WD); 95 PTO (4WD) 175 PTO (2WD); 140 PTO (4WD)
Maximum Tractor HP
Type Hitch 3 Point Category II or III or Quick Hitch 3 Point Category II or III or Quick Hitch
Moldboard Height and Thickness 20 inches x inches 20 inches x inches
1/4 3/8
Moldboard Cutting edge x 6 inches, Reversible x 6 inches, Reversible
1/2 1/2
4 inches 5 inches
King Pin Diameter
15° Up and Down 15° Up and Down
Tilt adjustment
35 inches left or right 35 inches left or right
Offset adjustment
45° left or right 45° left or right
angle adjustment
Standard Standard
Blade Parking stand
End Plates, Manual or Hydraulic Gauge Wheel, Cushion Valve Kit, Skid Shoes on 121
Options
1 year limited warranty
Warranty
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE