Page 3
Solo JM Style DIY Electric Guitar Kit Thank you for purchasing a Solo DIY guitar kit. This unfinished guitar kit has everything for building an electric guitar – you will need only some basic tools and finishing supplies. All challenging wood cutting, drilling and shaping is already professionally done, as well as fret leveling and dressing.
Page 5
STEP 3 – Installing the Bridge and Tailpiece. The JMK-10 has one set of bushings included in the kit for the bridge. Before installing the bushings, take the red ground wire, strip 3/8 - 1/2" of bare wire, and insert the opposite end into the hole that goes between the bushing hole and the control cavity.
Need help?
Do you have a question about the JMK-10 and is the answer not in the manual?
Questions and answers