Page 1
Quick Start Guide FULL HD Battery Wi-Fi Outdoor Camera Model: Snap 8S KEYCODE: 43061044 v.2.0.0 26/03/2021 P a g e...
Page 2
Welcome, Thank you for choosing our smart camera, getting started is easy font, What’s included 2.The T of thank you if need lower-case Commented [b2]: There not use blod font, if add? Snap 8S Bracket screw set charging Cable Product Details...
Wi-Fi extender to boost the Wi-Fi signal strength. Install the APP and register Account For the best experience, download the "Mirabella Genio" APP to your smartphone from the App Store or Google Play. 1. Insert the Micro SD card (Please note that the camera will work without an SD card, but it will not be able to record any footage.)
Remove the rubber cap to expose the SD card slot, insert the Micro SD card gently into the SD card slot. Please pay attention to the direction of the Micro SD card. Do not force it inside, once inserted, refit the rubber cap. Micro SD card size needs >8GB, Support up to Max of 128Gb, FAT32 format only, The camera doesn’t support NTFS file system.
Page 5
2. Check your mobile phone is connected to 2.4Ghz Wi-Fi network , Wi-Fi name should not end with -5G 3. Open the Mirabella Genio APP, tap on +, then choose Security & Sensor and select your camera from the list Commented [b3]: Attention, have Chinese words.
Page 6
example of how to scan QR code QR code is the code on your phone screen, not the barcode on the camera box 6. Camera is now successfully added into your APP. Please refer to the FAQ section for troubleshooting if this method does not connect. Q.
Page 7
Camera usage Tips (user interface may change with APP updates) Tap on the pencil icon or … icon you can access the camera’s Settings page Tap on and speak to your visitor (Two way talk must enable on basic function settings) Record live footage into your phone’s internal storage Take screenshots of current live footage...
Page 8
Device Name: You can customize the camera name here Share Device, If you wish to share or remove this camera with other genio APP user Device information: Detail information for this camera, owner information, Virtual ID, IP address etc Power Management Settings: Set the battery reminder percentage Basic Function Settings: Please ensure Talk Mode is set as Two Way Talk,...
Page 9
FAQ: How to connect camera to another router? Go the camera’ settings page, look for “remove device” Remove it and reset the camera and pair it again through the app. Poor performance, take long time to load the live footage? Please check the Wi-Fi signal, if it is less than 60%, you will need consider changing the camera location or purchase a Wi-Fi extender to boost the signal.
Page 10
On the genio APP home screen, tap on … on the top right corner, to access these options , tap on V to switch below rooms Need more help or need further technical assistant from Mirabella engineer? On the genio APP home screen, tap on, Me, -> FAQ & Feedback -> Report issue...
Page 11
All trademarks are used for reference purposes only. Made in China ANKO, HOME&CO AND AUDIOSONIC® ARE TRADEMARKS OF KMART AUSTRLIA LIMITED. MIRABELLA INTERNATIONAL PTY LTD 1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043 TOLL FREE: 1800 636 528, www.mirabellagenio.com.au 11 |...
Page 12
WARNING: Li-ion battery handling notice Always read the instruction manual and any warnings on the device before using a lithium-ion battery. Rechargeable lithium-ion batteries can explode, release flames, and/or cause burns if disassembled, punctured, cut, crushed, short-circuited, incinerated, recharged incorrectly, or exposed to water, fire, or high temperatures.
Need help?
Do you have a question about the Snap 8S and is the answer not in the manual?
Questions and answers