Advertisement
Draft: 10/25/2010
Recording Light
< >
• Use
to turn the recording light on and off.
To Return to Video Camera Setup Later
Starting with the video camera OFF:
1 Press power button to turn on.
2 When Flip Video logo appears, press and hold record button until Select a
Language appears.
PANEL 3
Record and Play
Touch-Sensitive Buttons
Gently touch lighted icons with your finger to activate the controls on the back
panel.
Record Videos
1 Press
to start/stop recording.
+ -
2 Press and hold
to zoom in/out during recording.
Play Videos
1 Press
to play/pause. Press and hold to play all videos.
+ -
2 Press and hold
to increase/decrease volume.
< >
3 Press
to view previous/next video.
< >
Note: Press and hold
during playback to rewind/fast-forward.
Deleting Videos
1 Press
button. Select YES to confirm.
Note: Delete button is locked when you first power on. To unlock, press and hold
delete button.
PANEL 4
Connect to Computer
1 Slide USB latch down. USB arm flips up automatically.
2 Connect USB arm to computer's USB port.
3 The battery pack will begin recharging and you can install FlipShare™ software
on your computer.
Recharge Battery
1 Slide USB latch down. USB arm flips up automatically.
2 Connect USB arm to computer's USB port.
3 Recording light turns on to indicate charging.
When charged, the recording light turns off.
• The video camera uses a sealed, rechargeable battery.
• Fully recharging the battery takes about three hours.
• The video camera may remain connected to your computer after it is fully
3
Advertisement
