Table of Contents
Advertisement
Linksys EA-Series
Product Overview
EA6200
Top view
EA6200
E A 6 3 0 0
E A 6 3 0 0
Indicator light—Stays on steadily while power is connected and
•
following a successful Wi-Fi Protected Setup connection. Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection. Flashes quickly when there is a Wi-Fi Protected Setup
error.
Back view
USB port
USB port—To easily share disk storage with other users on your network
•
or on the Internet, connect a USB drive to this port.
Ethernet ports—Connect Ethernet cables (also called network cables)
•
Indicator light
to these Gigabit (10/100/1000) ports, color coded blue, and to other
wired Ethernet network devices on your network.
Internet port—Connect an Ethernet cable (also called a network or
•
Internet cable) to this port, color coded yellow, and to your modem.
Wi-Fi Protected Setup™ button—Press this button to easily configure
•
wireless security on Wi-Fi Protected Setup-enabled network devices.
Reset button—Press and hold this button for 10 seconds (until the port
•
lights flash at the same time) to reset the router to its factory defaults.
You can also restore the defaults using Linksys Smart Wi-Fi.
Power port—Connect the included AC power adapter to this port.
•
CAUTION
Use only the adapter that came with your router.
Power button—Press | (on) to turn on the router. (EU models only)
•
Internet port
Wi-Fi Protected Setup button
Ethernet ports
Product Overview
Power port
Reset button
1
1
Advertisement
Table of Contents
