Supplied Accessories; Symbols Used In This Owner's Manual; Attaching The Base - Emerson LD280EM4 Owner's Manual

Supplied accessories

Owner's Manual
Remote Control and
batteries
(AAA, 1.5V x 2)
Screws packed with this unit.
Model
LD280EM4
Note(s)
• If you lose the screws, please purchase the above-mentioned Phillips head screws at
your local store.
• If you need to replace these accessories, please refer to the part name or No. with the
illustrations and call our toll free customer support line found on the cover of this
Owner's Manual.
When using a Universal Remote Control to operate this unit.
• Make sure the component code on your Universal Remote Control is set to our
brand. Refer to the instruction book accompanying your remote control for more
details.
• We do not guarantee 100% interoperability with all universal remote controls.

Symbols used in this Owner's Manual

The following is the description for the symbols used in this Owner's
Manual. Description refers to:
TV FUNCTIONS
Digital TV operation
Analog/Cable TV operation
• If neither symbol appears, the operation is applicable to both.
DVD FUNCTIONS
: Playback of DVD-video
DVD
: Playback of Audio CD
CD
• If neither symbol appears under the function heading, operation is
applicable to both.
Quick Start guide
TV base and screws
Quantity Size
3 M4 x 0.551"(14mm)

Attaching the base

You must attach the base to the unit to have it as a table top unit.
Be sure the front and rear of the base match the proper direction.
At least 2 people are required for these steps.
1
2
1
2
×
Note(s)
• Make sure to use a table which can support the weight of this unit and is larger than
this unit.
• Make sure the table is in a stable location.
• When attaching the base, ensure that "FRONT" with "arrow" written on the bottom
of the base is downward. If it's not downward, the 2 hooks don't fit into the base.
• When attaching the base, ensure that all screws are tightly fastened. If the base is not
properly attached, it could cause the unit to fall, resulting in injuries as well as damage
to the unit.
• To remove the base from this unit, unscrew the Phillips head screws in step 2.
Be careful not to drop the base when you remove it.
3
Continued on next page.
10
English