Trampoline And Enclosure Assembly - Airzone Jump BASIC AZJ-12FT Assembly Instructions Manual

TRAMPOLINE AND ENCLOSURE ASSEMBLY

WARNING: 2-3 adults in good physical condition are required for the following assembly. Wear proper
shoes and maintain balance to prevent a fall. Failure to follow all instructions and warnings exactly may
result in serious injury. Do not use your trampoline and/or enclosure until you have thoroughly read and
understand all instructions and warnings provided.
Button Lock
1. Attach each of the two leg
extensions(E) to the "W" shaped
leg(F). The leg extensions are
secured to the "W" shaped leg
by way of a button lock.
D
4. Slide one end of rail tube C
onto rail tube D like this.
REFER TO PARTS LIST FOR IDENTIFICATION OF PARTS
2. Repeat step 1 with the
remaining "W" shaped legs(F)
and leg extensions(E).
Properly assembled, each leg
assembly should look like this.
C
D
C
C
5. Continue step 4 by sliding the
balance top rail tubes together,
until a large circle is formed.
Joining the final segments
together may require three
adults in good physical
condition. With one person
holding the opposite side,
bring both ends of the circle
firmly together.
C D
D
C
D
C
3. To assemble the top rail, pick
out the two different rail tubes
C and D.
D
C
D
6. Insert the leg assemblies into
the "T" connectors of the top
rail.
C
D