Advertisement
Quick Links
EN
CAUTION / INFORMATION
IMPORTANT: Please read this manual carefully.
1. This height-adjustable desk has electric motors and is designed for use in dry work areas
only.
2. Make sure no obstacles are in the desk's path.
Make sure the desktop is not touching any walls.
Make sure all cords are appropriate length to accommodate the change in height.
3. Do not sit or stand on the desk frame.
Do not crawl or lie under the desk frame.
4. Do not place any objects taller than 20" underneath the desk.
5. Do not open any of the components – the legs, control box or switch. There is a risk of injury
and electric shock.
6. Make sure that the power supply is between 100v and 240v before plugging the control box
into it.
7. This product is designed with a 10% duty cycle (2 min. on, 18 min. off).
8. Under no circumstances does the manufacturer accept warranty claims or liability claims
for damages caused by improper use or handling of the desk frame.
SAFETY INSTRUCTIONS
1. Keep all electrical components away from liquids.
There is a risk of injury and electric shock.
Advertisement
Summary of Contents for Avandeo DESTIN II
- Page 1 CAUTION / INFORMATION IMPORTANT: Please read this manual carefully. 1. This height-adjustable desk has electric motors and is designed for use in dry work areas only. 2. Make sure no obstacles are in the desk’s path. Make sure the desktop is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height.
- Page 2 2. Keep children away from electric height adjustable desks, control units and memory controller. There is a risk of injury and electric shock. 3. People who do not have the product knowledge or have reduced physical or mental abilities shouldn't use it unless they are under surveillance or have been thoroughly instructed of the apparatus' usage.
- Page 3 4. The normal adhesive temperature is 8 °C - 32 °C, please try not to use the product at a lower temperature, to avoid that the paste will be too hard to get wet effectively. 5. After the product is pasted, please do not use it immediately. When it is placed for 5-10 hours, the effect will be better the next day.
- Page 4 RESET: In the "E10, E20, E60" alarm state or after running to the lowest altitude position, press and hold the button for 3 seconds, display and release the button and the table will start to run down to the bottom and rebounds to a certain height, and the reset completes to display the minimum height.
- Page 5 button for 3 seconds, the “S--” will be displayed and the screen will Press and hold the start flashing. Press the button again to enter the setting mode and display functions names, switch between them by using The functions that can be set are: The display unit of the table height: Unit ( Display brightness: Brightness ( The strength of collision protection: Collision Force(...
- Page 6 Unit SI Metric Press button to display the last height unit value set. Use buttons to flip between the options (SI, IN). After Inch selecting one, press button to save the current option value. Hold it for 2 seconds to exit. Brightness Press button to display the last...
- Page 7 parameter displayed. Use the settings. buttons to adjust it. Press button to confirm and save the current value. Exit setting mode. High After entering, the last seat height limit will be displayed. Use the buttons to adjust it. Press button to confirm and save the current value.
- Page 8 least 18 minutes before the next usage. Resist protection E02: During the movement, the table vibrates, is bumped or the table itself is tilted. It immediately stops the movement. The reverse movement is automatically released after setting the distance. Press any key to stop and release the movement during the reverse running.
Need help?
Do you have a question about the DESTIN II and is the answer not in the manual?
Questions and answers