Preparation Of Cabinet - LG LW2516ER Owner's Manual

12 INSTALLATION

Preparation of Cabinet

1
Remove 4 screws which fasten the cabinet
at both sides and at the back. (Keep the
screws for later use.)
Shipping
Screws
2
Slide the unit from the cabinet by gripping
the base pan handle and pulling forward
while bracing the cabinet.
CAUTION
● The unit is heavy. To prevent injury, use
proper lifting techniques when pulling unit
forward from cabinet. Obtain assistance
from another person if possible.
3
Cut the window sash seals (Foam-PE)
to the proper length. Peel off the backing
and attach the adhesive-backed foam to
the underside of the window sash and the
bottom of the window frame.
Foam-PE
(Adhesive backed)
Insert the hooks on the lower panel guides
4
into the slots on the bottom of the cabinet.
Make sure that the flanges on the lower panel
guides will face toward the inside of the room.
5
Insert the top and bottom rails of the curtain
panels into the upper and lower panel
guides.
Upper Panel Guide
Left Curtain Panel
Lower Panel
Guide
CAUTION
● The lower panel guides are easily broken. Be
careful with them when installing the cabinet.
6
Fasten the curtain panels to the unit with 10
type A screws.
Fasten the screws behind the curtain panel.
Screws
(Type A)
NOTE
● Use a long screwdriver to make installing the
screws easier.
Hook
Indoor
Right Curtain Panel
Screws
(Type A)