Panasonic TX-24GS350 Service Manual page 12

If OFF is selected TV will go on normal operation. If It is ON RCU will not function in any menu(including no menu)
except this menu. To turn this option OFF later, "hotel TV menu shortcut" (MENU(M)-7-9-3-5) can be used to pop
up this menu,
Startup Position
Specifies the starting channel when TV is switched ON. May take one of following values:

AUTO
•
TV is opened using standby key or digit keys: Last channel or last external source when TV is turned off

TV
•
TV is opened using standby key: TV channel number that is specified on field Startup Channel
•
TV is opened using digit keys: Corresponding channel

Other external sources (EXT1, HDMI2, PC, FAV, SVHS etc.)
•
TV is opened using standby key or digit keys: Specified external source
Startup Channel
Specifies the starting TV channel's ID which will be tuned when startup position is TV.
Volume Limit
Sets the maximum value the volume can have. "Volume Limit" can take values between 0-63.
Fixed Volume Enable
Enables (Fixed Volume Enable = On) or prohibits (Fixed Volume Enable = Off) the use of fixed volume value which
is set by menu item "Fixed Volume Value". If Fixed Volume Enable is ON, volume cannot be set to a value other
than the Fixed Volume Value.
Fixed Volume Value
Sets the fixed value the volume can have. If Fixed Volume Limit is ON, volume is set with the value here.
Headphone Direct Volume
Enables the remote controller volume +/- buttons to change the headphone volume directly. When this features is
active, volume +/- buttons changes only headphone value, and to change the TV main sound it can be control from
sound OSD dialog only.
OSD Disable
Disables either only Setup menu or all menus, both in analog and digital (IDTV) mode.
All Menus : All menus (MAIN, SOUND, PICTURE, SETTINGS, INSTALLATION) are invisible.
OSD Disable = Disable Setup Menus : Only SETUP menus are invisible.
Invisible Setup Menus are:
Main menu: Installation, Channel list
Settings menu: Language, parental, Sources, Other settings
Teletext
Enables (Teletext = On) or prohibits (Teletext = Off) the use of teletext (or MHEG if available)
Wakeup Time Channel
To choose the TV set wake up channel.
Wakeup Time Volume
To modify the volume of TV wake up volume ( It can´t be set higher volume than volume limit).
Copy To USB
There are two steps and both are independent of each other.
Copy the updated welcome image to USB as "hotel_wel.png"
Copy NVRAM data (service list, preferences, etc.) to USB device. On MB9x all nvram data is stored in 8x32KB
Flash files named as Flash0.bin, Flash1.bin ... Flash7.bin. When Copy to USB is called, those files are copied from
11