Table of Contents
Advertisement
You've purchased a heater from North America's oldest manufacturer of wood burning products.
Wood is our only Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least
Combustible:
Flue Pipe Diameter:
Flue Pipe Type: (Standard Single Wall or Double Wall):
Minimum Chimney Height:
Maximum Log Length:
Electrical:
Dimensions
Combustion Chamber:
Width x Depth:
Volume:
Cubic Feet:
Door Opening: Width x Height:
Weight (lbs):
0215WH080E
This wood heater has a manufacturer-set minimum low burn rate that must not be altered. It is against federal
regulations to alter this setting or otherwise operate this wood heater in a manner inconsistent with operating
instructions in this manual.
The operation of this wood heater in a manner inconsistent with the owner's manual will void your warranty and
is also against federal regulations.
This heater is designed to burn natural wood only. Higher efficiencies and lower emissions generally result when
burning air dried seasoned hardwoods, as compared to softwoods or to green or freshly cut hardwoods.
This wood heater needs periodic inspection and repair for proper operation. It is against federal regulations to
operate this wood heater in a manner inconsistent with operating instructions in this manual.
Specifications
CONGRATULATIONS!
By heating with wood you're helping to CONSERVE ENERGY!
one tree each year. Future generations will thank you.
This manual describes the installation and operation of the Ashley, 1660E wood
heater. This heater meets the 2016 U.S. Environmental Protection Agency's
emission limits for wood heaters sold after May 15, 2016. Under specific EPA
test conditions this heater has been shown to deliver heat at a rate of 33,438
to 77,456 BTU/hr. This heater achieved a particulate emissions rate of 0.305
lbs/mmBTU when tested to method CSA B415.1-10 (*and an overall efficiency
of 61.9%.) The maximum overall heat output of this heater was tested to be
104,720 BTU/hr.
Wood
6" (153cm)
Black or Blued Steel 2100°F (650°C) Class "A"
12'
28"
120V, 60Hz, 3.4A per blower
17.4" X 28.3"
6.27 cubic ceet
12.625" X 12.5"
509lbs
3
Advertisement
Table of Contents
