Table of Contents
Advertisement
Temporarily Storing the Lens Hood
1 Turn the lens hood in the direction of the arrow to detach it.
2 Align the mark C (
3 Turn the lens hood in the direction of the arrow until it clicks into place.
∫ Attaching the Leather Body Case
Place the camera with its lens portion facing forward, and tighten the screw on the bottom.
•
To take out the camera from the Leather Body Case, after loosening the screw on the bottom,
pull out the camera while holding it firmly and taking care not to drop it.
Notes on the use of the Leather Body Case and Shoulder Strap
•
When attaching a monopod or tripod, do not hold the camera and overtighten the
monopod or tripod screw.
–
When you use a monopod or tripod with a ball head mount (a type that requires you to rotate
the whole tripod head when attaching the camera), we recommend that you take out the
camera from the Leather Body Case before attaching it to the monopod or tripod.
•
The NFC function is not available when the Leather Body Case is attached.
•
The Leather Body Case is designed to give protection while carrying around, and it does not
guarantee protection from damage caused by dropping it or impact.
•
When storing the camera for a long period of time, take it out from the Leather Body Case.
•
The Leather Body Case and Shoulder Strap are not waterproof.
Be careful not to wet them in adverse conditions such as rain.
•
Do not leave the Leather Body Case and Shoulder Strap in a car exposed to direct sunlight or
in a hot and humid location, such as a bathroom.
•
If the Leather Body Case or Shoulder Strap gets wet, after wiping the moisture off the wet
portion with a dry cloth (hand towel, etc.) and stretching the case or strap back to its proper
shape, let it dry thoroughly in the shade.
•
To clean the Leather Body Case and Shoulder Strap, wipe them with a dry soft cloth.
–
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet
cloth, and then with a dry cloth.
–
Do not use solvents such as benzine, thinner, alcohol or dishwashing liquid, as these may
damage the the Leather Body Case and Shoulder Strap.
–
When using a chemical cloth, be sure to follow the accompanying instructions.
•
Store the Leather Body Case and Shoulder Strap in a cool, dry, and well-ventilated location free
of dust and chemicals.
•
Since leather is used in the Leather Body Case and Shoulder Strap, discolouration and
fading may occur.
) on the lens hood with the mark on the tip of the lens.
Preparation/Basic
13
(ENG) SQT1122
Advertisement
Table of Contents
