Table of Contents
Advertisement
3.
Disconnect the LED board FFC.
4.
Tear off the aluminum foil on the LEd board.
5.
Remove the two screws holding the LED board assembly.
6.
Then remove the two screws that secure the LED baord to the LED board bracket. Then you can remove
the LED board from the bracket..
7.
Disconnect the LED board FFC.
8.
Disconnect touchpad FFC from the touchpad.
9.
Slide the touchpad bracket to left then remove the touchpad bracket. Then you can remove the touchpad
(with touchpad FFC) from the upper case.
10. Disconnect the touchpad FFC.
11. Remove the screw that holds the touchpad board.
.
12. Take away the touchpad board from the upper case.
13. Disconnect LED 22 pins FFC from touchpad board.
14. Disconnect the FDD FPC.
Chapter 3
63
Hide quick links:
Advertisement
Table of Contents
