GearLight S1 User Manual

TROUBLESHOOTING

If the safety light flickers, works intermittently, changes modes automatically,
appears dim or faded, or does not turn on, check and verify that:
• The back plate is securely attached and the screws are on tightly.
• The batteries are inserted correctly according to the instructions.
Firmly press the power button on and o several times:
• If the safety light still does not turn on, replace the batteries.
• If the problem persists, contact GearLight for a replacement.

MAINTENANCE

Inspect the safety light monthly and carefully remove any damaged battery and clean
any corrosion. If the safety light is used less than once a month, remove the batteries
between uses.

WARRANTY AND LIMITATION OF LIABILITY

Limited One-Year Warranty
GearLight warrants this product for one year from the date of purchase
against any defects in material or workmanship. This warranty does not cover
normal wear and tear, nor damage resulting from misuse or neglect. We will,
at our discretion, repair, replace, or refund the purchase price of this product
should we determine it to be defective.
Limitation Of Liability
Liability limited to the purchase price of this product. GearLight shall not be
liable for any incidental or consequential damages or any implied warranty on
this product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
Irvine, California | USA | www.GearLight.com
S1 LED SAFETY LIGHTS

FOR YOUR SAFETY, READ BEFORE OPERATING

Package Contents:

2x Red GearLight S1 LED Safety Lights
2x Green GearLight S1 LED Safety Lights
4x Straps
4x Extra CR2032 Batteries
1x Mini Philips Screwdriver
1x User Manual
v2
1x Warranty Card
User Manual