Sencor SVS 4010SS User Manual

Sencor SVS 4010SS User Manual

Vacuum sealer

Advertisement

Quick Links

Vacuum Sealer
User's manual
SVS 4010SS
Translation of the original manual
Prior to using this appliance, please read the user's manual thoroughly, even in cases, when one has already famili-
arised themselves with previous use of similar types of appliances. Only use the appliance in the manner described
in this user's manual. Keep this user's manual in a safe place where it can be easily retrieved for future reference.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility state-
ment of the vendor or warranty card for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the
manufacturer.
EN-1
2020
05/2020

Advertisement

Table of Contents
loading

Summary of Contents for Sencor SVS 4010SS

  • Page 1 Vacuum Sealer User's manual SVS 4010SS Translation of the original manual Prior to using this appliance, please read the user's manual thoroughly, even in cases, when one has already famili- arised themselves with previous use of similar types of appliances. Only use the appliance in the manner described in this user's manual.
  • Page 2: Table Of Contents

    Vacuum Sealer SVS 4010SS CONTENTS IMPORTANT SAFETY INSTRUCTIONS ................3 DESCRIPTION OF THE APPLIANCE .
  • Page 3: Important Safety Instructions

    Vacuum Sealer SVS 4010SS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND STORE FOR FUTURE USE. General warnings ■ This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand...
  • Page 4 Vacuum Sealer SVS 4010SS appliance during the warranty period may void the warranty. ■ To prevent the risk of injury by electrical shock, never submerge the appliance and its power cord in water or any other liquid, or wash these parts under running water.
  • Page 5: Description Of The Appliance

    Vacuum Sealer SVS 4010SS DESCRIPTION OF THE APPLIANCE A1 Tilt-out lid A9 Rubber strip A2 Sealing strip Ensures that the seal weld will be 100% smooth. The 3 mm sealing strip creates a strong seal by A10 Latches melting. They ensure that the tilt-out lid is pushed against A3 Top gasket the base unit and ensure a firm connection.
  • Page 6: Description Of The Control Panel

    Vacuum Sealer SVS 4010SS DESCRIPTION OF THE CONTROL PANEL Gentle Normal Moist Mode Food Canister Vac Seal Marinating Seal Stop B1 "Mode" button (with LED indicators) Enables air to be sucked out of a bag and Enables the setting of two vacuum operating modes subsequently sealed.
  • Page 7: Description Of The Appliance

    Vacuum Sealer SVS 4010SS DESCRIPTION OF THE APPLIANCE Making a bag from foil to start the sealing process, indicator B13 will be lit. When it is finished, indicator B13 will turn off; Note: release the lid by pressing buttons A12 on both In the event that vacuum sealer bags are sides of the vacuum sealer.
  • Page 8: What Is The Purpose Of A Vacuum Sealer

    Vacuum Sealer SVS 4010SS WHAT IS THE PURPOSE OF A VACUUM SEALER ■ When stored in the normal manner, foodstuffs lose their flavour, aroma and nutrients. Bacteria multiply, moulds form in these foodstuffs, which leads to their spoilage. The vacuum sealer enables one to create a vacuum package, and the freshness of foodstuffs can be extended by up to 7 times compared to standard storage methods without...
  • Page 9: Using The Vacuum Sealer

    Vacuum Sealer SVS 4010SS USING THE VACUUM SEALER 1. SEALING 1.1. Connect the power cord and turn on the appliance. 1.2 Tilt open the lid A1, fill the bag up to max. 2/3 of its volume and insert its open end into the vacuum chamber A8 so that its edge extends over the rubber strip A9 by at least 1.5 cm.
  • Page 10 Vacuum Sealer SVS 4010SS 3.4 First disconnect the connector of hose A13 from the hole in the lid of the jar and only then disconnect the connector from the air suction inlet A11. Note: Neither the vacuum jar nor the lid are included with this appliance.
  • Page 11: Useful Tips

    ■ A rest period of at least 40 seconds is recommended between the sealing cycles to enable the appliance to cool down. ■ If you are uncertain whether a bag is properly sealed, repeat the sealing cycle. ■ To achieve the best results, use vacuum sealer bags, jars and other accessories of the SENCOR brand. RECOMMENDATIONS FOR VACUUM SEALING WITH ACCESSORIES Before using accessories such as vacuum jars, vacuum containers, vacuum plugs, etc., adhere to the following points.
  • Page 12: Food Storage Time

    Vacuum Sealer SVS 4010SS ■ When adjusting the size of a bag, check the seal on the bag. Any creases along the seal may cause a leak, and allow air to flow back into the bag. In this case, cut off the faulty seal and create a new one.
  • Page 13: Maintenance And Cleaning

    Vacuum Sealer SVS 4010SS ROOM TEMPERATURE 25 °C (±2 °C) Food type Not vacuum sealed Vacuum sealed Fresh bread 1-2 days 8-10 days Biscuits 4–6 months 12 months Pasta/rice (uncooked) 5–6 months 12 months Flour 4–6 months 12 months Dried fruit 3–4 months...
  • Page 14 Vacuum Sealer SVS 4010SS Explanation of technical terminology Safety class for electrical shock protection: Class II – Electrical shock protection is provided by double or heavy-duty insulation. We reserve the right to change text and technical specifications. EN-14 2020 05/2020...
  • Page 15 Vacuum Sealer SVS 4010SS EN-15 2020 05/2020...
  • Page 16: Instructions And Information Regarding The Disposal Of Used Packaging Materials

    Vacuum Sealer SVS 4010SS INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste.

Table of Contents