Safety Symbols - Nakayama PM4810 Manual

EN

Safety Symbols

Read the instruction
manual before using the
machine.
Do not touch rotating
parts.
Assembly
Unpacking
Remove lawn mower from carton and check thoroughly for additional loose parts.
Handle Setup
Open out the handle and screw the handles parts with the four screws and knobs. Put the recoil starter on the right of the handle and fix the cable with the
plastic collar. Introduce the rope of the recoil starter handle on its support guide rope.
Handle Bar Height Adjustment (Pictures 2 and 2b)
If you want to adjust height of the handle bar, you can choose" L" or "H" two holes in left-right Bracket to fix the handle bar with screws and knobs.
The "H" hole is high position of the handle bar, and the "L" hole is low position of the handle bar.
Brake & Clutch Cable Setup (Picture C)
Insert the brake cable and clutch cable in to the hole of appropriate lever, see the illustration. The arrow indicates where the cable should loop through.
Panel Setup (Pictures D and D1)
Take out panel and two screws or bolts in a bag from carton, and fix the panel with screws.
* Note: Different model have different panel. Not all models do have middle Panel.
Grass Bag Assembly (Pictures E and F)
• Clip the plastic edges of the bag onto the frame and attach the clips as shown.
The grass collector comes with a handy indicator showing whether the box is full of grass and needs emptying.
• Lift the rear discharge guard, remove the mulching plug, and install the grass bag.
Mulching plug (Picture G)
The mulching plug helps to curve the inside of the mower deck for more efficient mulching. Install and remove the mulching plug by raising the rear discharge
guard as shown. The mulching plug only fits one way. Remove the mulching plug when using a grass bag.
Rear Discharge Guard Props (Picture H)
Take out two supports in a bag from carton, and lift the rear discharge guard, install the two supports which can hold the rear discharge guard, and this can
make the grass out more efficiently from the deck.
Side Discharge Cover Assembly (Picture I)
Lift the side discharge guard, install the side discharge cover.
Only Mulching: please remove the side discharge cover.
* Note: Not all models do have side discharge guard
7
Keep other people at
a safe distance while
working
Stop the engine before
cleaning of work area.
WWW.NAKAYAMATOOLS.COM
Remove the spark plug
cable from the spark
plug and read instruc-
tions before carrying out
any repair or mainte-
nance.
Blades in movement. Do Do not use on hills above
not put hands or feet 22°
near or under the open-
ing of the cutting plate.