●
For information about the power consumption, display
resolution, etc., refer to Product fiche.
●
For information about the open source software, refer
to [eHELP] (Search by Purpose > Read first >
Before use > Licence).
■
When using the wall-hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
●
When moving the TV, support the TV as shown in
step 1 (p. 8).
Preparations
Put the TV onto a work table with the screen panel down
on the clean and soft cloth (blanket, etc.)
●
Use a flat and firm table bigger than the TV.
●
Do not hold the screen panel part.
●
Make sure not to scratch or break the TV.
1 Remove the screw cover
(Using a flathead screwdriver, etc.)
2 Remove the assembly screws
3 Remove the back bracket
1
F
2
from the back bracket
.
.
G
E
3
.
●
Holes for wall-hanging bracket installation
Rear of the TV
(View from the side)
Depth of screw
minimum: 23 mm
maximum: 28 mm
Diameter: M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
●
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
●
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
●
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
●
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
55-inch model
a: 400 mm
a
b: 300 mm
65-inch model
b
a: 400 mm
b: 400 mm
25
English