Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Trainertec Electronic SP13
- Page 1 Remote Spray Trainer Operation Guide...
- Page 2 Remote Spray Trainer Operation Guide Thank you for choosing SP13 Remote Spray Trainer. Our mission is to offer the best electronic training solutions. We want to ensure your dog’s safety by providing you with the tools and techniques to successfully train your pet. Please feel free to contact us if you have any problems and we will resolve them immediately.
- Page 3 worn for too long or made too tight on the pet’s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. Avoid leaving the collar on the dog for more than 8 hours out of every 24 hours and try to reposition the collar on your dog’s neck every 1 to 2 hours if possible.
- Page 4 temperatures over 113°F or 45°C. 5. Do not burn. Do not dispose of in fire, even when empty. 6. Keep out of direct sunlight. 7.Do not leave the aerosol can in a vehicle where temperature could exceed 113°F or 45°C. 8.Store in a cool location.Keep away from sparks or flame.
-
Page 5: Table Of Contents
Improper or inappropriate use of a training collar system can be harmful. Please use this product correctly and pay attention when training your dog. Table of Contents Components…………………………………………..6 How the system works…………………………....6 Main Features………………………………………….7 Transmitter……………………………………………..9 Receive Collar………………………………………...11 Charge the Receive collar…………………………….12 Insert the Transmitter battery……………………..13 - 4 -... - Page 6 Match a Receive Collar………..………….…………...14 Training Guide……………………………………..…..15 General Training Tips.……………………………..16 How Dogs Learn……………………..……………..….18 Remote control mode & Auto anti bark mode………..19 How to work with Auto anti bark………………..…..19 Adjust the Sensitivity Level………………..…………..20 Frequently Asked Questions…………………………...20 Troubleshooting Guide…………………………………23 - 5 -...
-
Page 7: Components
Components How the System Works The SP13 Remote spray collar has been proven safe, comfortable, and effective for all pets over 6 months old. This system assists you in controlling your pet without a leash in a long distance range. At... -
Page 8: Main Features
Also, The SP13 Remote Spray Trainer has anti bark function .When you don’t use remote control in the first 1 minute after turning on the collar , the receive collar will enter anti bark mode automatically. - Page 9 -Auto anti bark function. -Suitable for all dogs. - Train up to 2 dogs with the same transmitter. - Long and Short spray. - High and Low warning beep. - Select your dog with dog selection button. - Rechargeable 3.7V Li-ion battery for receiver. - 2 PCS of 1.5V AAA battery for remote controller.
-
Page 10: Transmitter
Transmitter Green Led Red Led Dog 2 Dog 1 Long Spray Short Spray High Beep Low Beep Red Led: Indicates the first dog and low battery. Press the Dog1button or Spray button or beep button one time, the Red led light will flash one - 9 -... - Page 11 time after choosing the first dog. When low battery , the Red led will flash 1 time per second. Green Led: Indicates the second dog. Press the Dog 2 button or Spray button or beep button one time, the green led light will flash one time after choose the second dog.
-
Page 12: Receive Collar
Receive Collar Blue Led Indicates the sensitivity Spray Nozzle level High, Middle and Low. LED Light Indicates the working status, low battery, low Microphone spray, charging status. Dog bark sensor. Pick up the dog’s bark. Mini USB Refill Port On/Off button Press and hold on 2 seconds to turn the collar on. -
Page 13: Charge The Receive Collar
Function and Response Table Function LED Light Response Unit is on Green light flash 1 time per 5 seconds Low battery Red light flash 1 time per second Low spray Red light flash 1 time per 5 seconds Charging Red light is on Full charge Green light is on Charge the Receive collar... -
Page 14: Insert The Transmitter Battery
The red LED light is on when charging. The green LED light is on and the red LED light is off when the receive collar is full charged. The receiver’s red LED light will flash one time per second when the battery is low power. -
Page 15: Match A Receive Collar
Match a Receive Collar To add a receive collar to your remote dog training system, please follow below steps. Only turn on 1 collar at a time to connect then follow below steps for the 2 collar if required. Step 1:Take out 1 unmatched receive collar. Press and hold “ON/OFF”... -
Page 16: Training Guide
collar ) until hearing 5 “beeps” sound from the receiver then release . If you want to match the second dog collar , press and hold on the Dog 2 button . Note: You should press and hold on Dog 1 button or Dog2 button within 10 seconds after turn on the unmatched receive collar . -
Page 17: General Training Tips
middle of the dog’s neck. The receiver should be on the underside of his/her neck, with the Spray Nozzle towards the dog’s nose. The Receive Collar should fit snugly, yet loose enough to allow one finger to fit under the strap. Ensure a Proper Spray Pattern For the Receive Collar to perform properly, the nozzle must be positioned correctly and there must be a clear path from the Spray... - Page 18 10-15 minutes.) 2. Train one dog at a time. 3. During the first initial training session, keep the dog in a familiar outdoor environment. 4. Use a long leash fastened to a non-metallic collar to help the dog's learning. 5. Be consistent. Give your dog a tone and/or spray with each misbehavior.
-
Page 19: How Dogs Learn
13. Never use the SP13 Remote Spray Trainer to correct or eliminate any form of aggressive behaviour. If your dog exhibits such behaviour, contact a professional trainer. Aggression in dogs is the result of many factors- it may be a learned behaviour or it may be brought on as a result of fear. -
Page 20: Remote Control Mode & Auto Anti Bark Mode
Don’t introduce remote training around distractions. Keep things simple for your dog in their first sessions. They can’t learn well when there’s too much going on. Remote control mode & Auto anti bark mode Auto anti bark mode : The receive collar will enter auto anti bark mode automatically 1minute later when you turn on the receive collar and don’t use the transmitter to get any signals within first 1minute. -
Page 21: Adjust The Sensitivity Level
collar continue to detect the barking in 1 seconds. 3)The collar will return to the original status if it can’t detect the barking in 120 seconds.Then it will start to issue warning beep again. Adjust the Sensitivity Level 1) The receive collar has 3 levels of sensitivity : Low , Middle and High. - Page 22 How old should my dog be before I use this device? It is recommended that your dog be 6 months old to use a training collar. Your dog should have learned the basic commands such as “sit” or “stay”. The collar is too long, is it ok to cut off the excess collar? Yes.
- Page 23 Does the spray need to hit my dog’s nose ? No. The spray is very fine and simply creates a mist in the region of the snout. Will this work automatically when my dog barks? Yes, you need to confirm the receive collar is Auto anti bark mode.
-
Page 24: Troubleshooting Guide
Troubleshooting Guide Problem#1: No spray or beep when a transmitter button is pressed The receiver has not been activated. The receiver must be turned on otherwise it won’t work at all. The receiver has not been matched to your transmitter. Follow the instructions to match. - Page 25 You are training in very cold weather. Problem#4: The remote trainer doesn’t have range or the range is significantly reduced. Either you or the dog is shielded by a metal structure. Operate it far away from these structures. The receiver is on backwards. For best range, position the receiver so that the light face toward the dog’s nose.
- Page 26 changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 27 to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Need help?
Do you have a question about the SP13 and is the answer not in the manual?
Questions and answers