Advertisement
ASSEMBLE E 2-IN-1 TURTLE SANDBOX & POOL
1
Remove the post from
under the turtle's sunshade/lid.
3
Insert one end of the post into the larger
opening on the turtle.
P YING IN E SAND
• Cover the play area before beginning.
• Tear open the moldable sand packets and pour the sand into the sandbox. Dispose the packets.
• Keep water away from the sand.
• Follow the cleaning instructions after playing.
SAND MOLDS
Flip over the mold and pour the sand into the mold.
Compress the sand. Then, ip over the mold
and shake it a little to release the sand.
2
2
Attach the shorter post to the
connector on the longer post.
4
Insert the other end of the post into the larger
opening on the sunshade/lid. Then, attach the
ower sprinkler in the center of the turtle.
SAND CASTLES
Move the handle out of the way and remove the lid.
Pour sand into the bucket and compress the sand.
Flip over the bucket and shake it to release the sand.
P YING IN E POOL
• Before beginning, cover the play area to protect from possible water damage.
• Make sure to remove the sand before pouring the water.
• Follow the cleaning instructions after playing.
1
Fill the turtle halfway with water. Do not over ll.
Then, allow the water to seep into the oor panel
for a minute or two.
3
Squeeze the squirting sh and dip in water.
Then, release the pressure on the sh to ll
it with water. Squeeze again to squirt out the water.
1. Pour out the water or sand from the sandbox/pool. Store the sand.
2. Remove the oor panel (Fig. 1). Wipe o any remaining water or sand from the sandbox/pool and panel.
3. Replace the oor panel, making sure to insert the opening into the peg on the turtle (Fig. 2).
FIG. 1
2
Gently and slowly press down the star sh on the turtle
a couple of times to activate the ower sprinkler.
Make it a beach day with
S nd & Sun Lilly, Ami or Tommy.
(DOLLS SOLD SEPARATELY.)
CLEANING
FIG. 2
3
Advertisement
