Advertisement
Innovation
Initial Demo Kit Setup:
Congratulations on your purchase of a TruAudio Luxury Outdoor Sound Demo Kit. You are
moments away from being able to wow your first customer with high-quality immersive out-
door audio. There are only a few small steps before your demo kit is ready to use.
Here are the steps to setup your demo kit in front of a customer.
Step 1: Carefully remove the equipment from the cases and place out in the customer's
outdoor living area.
Step 2: Connect the amplifier to the speakers and subwoofer using the provided quick
connect wiring kit.
Step 3: Plug in the extension cord and power stip. Connect the power cable to the amp and
connect the Bluetooth to the power and RCA input on the AMP.
Step 4: Push the power button on the front of the amp and wait for the amp to power up.
Adjust the gain control knobs on the front of the amp to about 80%
Step 5: Confirm the amp says AS/HS. If not change the amp to read AS/HS.
Step 6: Push the button on the top of the Bluetooth adapter. Using your mobile device, now
search for the Bluetooth device called "Logitech BT."
Step 7: Turn down the volume on your mobile device to about 50% and turn on your music.
Slowly increase the volume to a comfortable listening level, then enjoy! To switch
users, simply repeat step 4 for the new device.
www.TruAudio.com
888.858.1555
Outdoor Demo Kit
198 North Old Highway 91 Hurricane, UT 84737
Instruction Card
Advertisement
