Advertisement
5.
MAINTENANCE
WARNING! Disconnect grinder from air supply before changing disc, servicing or performing maintenance.
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will
invalidate the warranty.
5.1
Lubricate the grinder daily with a few drops of good grade air tool oil, such as Sealey ATO1000S,
dripped into the air inlet before use or dispensed automatically through an air system oiler, such as Sealey
model SA2001/L.
5.2
Clean the grinder after use and change the disc when worn or damaged.
5.3
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air supply. Moisture or restriction in the air line. Incorrect size or type of hose
connectors. To remedy check the air supply and follow instructions in Section 3.
b) Grit or gum deposits in the grinder may also reduce performance. Flush the grinder with gum solvent
oil or an equal mixture of SAE No 10 oil and kerosene. Allow to dry before use.
If you continue to experience problems, contact your local Sealey service agent.
5.4
For a full service contact your local Sealey service agent.
5.5
When not in use, disconnect from air supply, clean grinder and store in a safe, dry, childproof location.
1.2.
LEAD PAINT WARNING!
Paint once contained lead as a traditional ingredient. Contact with the dust from the removal of such paint is toxic
and must therefore be avoided. The following action must be taken before using the grinder on a surface that you
suspect may contain lead paint.
1.
User must determine potential hazard relating to age of paint to be removed (modern paints do
not have lead content).
2.
DANGER! Keep all people and pets away from the working area. The following are particularly
vulnerable to the effects of lead paint dust: Expectant women, babies and children.
3.
We recommend personal protection by using the following safety items:
a) Paint Spray Respirator (Our ref SSP1699)
b) PE Coated Hooded Coverall (Our ref SSP267).
4.
Take adequate measures to contain the paint dust, flakes and scrapings.
5.
Continue to wear safety equipment as in (3) above and thoroughly clean all areas when work is
complete. Ensure paint waste is disposed of in sealed bags or containers.
WARNING! The grinding process can produce streams of sparks which are a potential source of ignition especially when grinding
metal.
DO NOT use the grinder where there are flammable liquids, solids or gases.
DO NOT allow grinder sparks to make contact with the operator's clothing or any other fabric such as cleaning rags. Fabrics
contaminated with inflammable materials such as petrol, oil, grease, paint and solvents are a particular fire hazard.
To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated with a fire retardant in
preference to man-made fibres.
The SA44.V3, when operated in accordance with these instructions and tested in accordance with EN 28662-2: 1994 results in
the following vibration emission declared in accordance with BS EN12096: 1996.
Measured vibration emission value: .....................2.33m/s
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome: This item represents a low Hand Arm Vibration
risk to users. The calculated maximum usage period exceeds 8 hours. We recommend appropriate safety equipment is utilised
and regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive strain injury.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
DANGER OF FIRE/EXPLOSION HAzARD
Risk of Hand Arm Vibration Injury.
2
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
c) Latex Gloves (Our ref SSP24).
Uncertainty: ............................................0.93m/s
01284 757500
01284 703534
2
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SA44.V3
Issue: 3 - 08/12/09
Advertisement
