Summary of Contents for FHM ECO-19
- Page 1 Chipper/Shredder with 2-Way Feed Owner’s Manual Chipper/Shredder models: ECO-19 READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY SAVE THESE INSTRUCTIONS.
- Page 2 The information and specifications included in this publication were in effect at the time of approval for printing. For product questions or service, CALL 1-541-895-3083 or go to www.betstproducts.com When you call the help-line you will need to have the following information: Date of Purchase: _______________________ Location of Purchase: _______________________...
-
Page 3: Table Of Contents
Contents Warnings.......................4 Warnings.......................5 Component Identification.................6 Missing Parts Request Form..............7 Safety Information..................8 Operating Guidelines.................9 Assembly Instructions................10 Operating Instructions................11 Maintenance and Storage................12 Troubleshooting..................14 Parts Breakdown ..................15 Parts•Request•Form................22 LIMITED WARRANTY & REGISTRATION FORM........23 2 YEAR EXTENDED WARRANTY & REGISTRATION......25... -
Page 4: Warnings
Warnings WARNING WARNING This symbol indicates important safety instructions which, if not followed, could endanger personal safety and/or property. Read and follow all instructions in this manual before attempting to operate this machine. Keep bystanders, helpers, pets, and children at least 75 Failure to comply with these instructions may result in feet from the machine while it is in operation. -
Page 5: Warnings
Warnings Training 1. Read, understand, and follow all instructions on the 7. Do not put hands or feet near rotating parts or in the machine and in the manual) before attempting to feeding chambers and discharge opening. Contact assemble and operate. Keep this manual in a safe with the rotating impeller can amputate fingers, place for future and regular reference and for hands, and feet. -
Page 6: Component Identification
Component Identification Shredder Chute, for leaves and twigs up to 1” diameter Chipper Chute, for branches up to 3” x 5” 3-Point Cat-I tractor connections Chip discharge Adjustable length 6 spline PTO shaft Adjustable Height stand allow you to aline tractor PTO and chipper/shredder PTO If you are missing any parts, please complete the form on the next page and fax it back to us at:541-895-2756... -
Page 7: Missing Parts Request Form
Hardware bag Name Wheel Kit Other Address Date of purchase Model #: ECO-19 Phone Email Serial #: Comments: IMPORTANT: Please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@betstproducts.com. If emailing, please scan in... -
Page 8: Safety Information
Safety Information Your Responsibility Restrict the use of this chipper/shredder to persons who read, understand and follow the warnings and instructions in this manual and on the machine. Note: Not all safety labels shown may apply to your chipper/shredder. Never store machine or fuel container inside near Preparation an open flame, spark, or pilot light (e.g., furnace, water heater, space heater, clothes dryer, etc.). -
Page 9: Operating Guidelines
Operating Guidelines READ THESE OPERATING GUIDELINES The lower chute is for BEFORE YOU PROCEED ANY FURTHER longer and/or thicker pieces of yard waste. 1. Do not put hands and feet near rotating parts or in the Depending on your feeding chambers and discharge opening. Contact with model, you may cut up the rotating impeller can amputate fingers, hands, and to a 3”... -
Page 10: Assembly Instructions
Assembly Instructions Required tools: Approximate assembly time: 1. Remove the chipper from its carton. Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton. 2. Verify all parts are in the chipper carton. -
Page 11: Operating Instructions
Operating Instructions Using the Chipper Shredder DANGER Yard waste such as leaves and pine needles can be raked up and placed in the chipper funnel for shredding. This machine was built to be operated according to the DO NOT PUT BRANCHES INTO THE CHIPPER rules for safe operation in this manual. -
Page 12: Maintenance And Storage
Maintenance and Storage Maintenance Schedule 6. Follow this manual for safe loading, unloading, transporting, and storage of this machine. WARNING 7. Never store the machine or fuel container inside where there is an open flame, spark or pilot light such Always stop engine, disconnect spark plug, and as a water heater, furnace, clothes dryer, etc. - Page 13 WARNING Maintenance & Storage Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine. · Scribe a mark on the base plate along the edge of the engine. Removing and Sharpening the Blade ·...
-
Page 14: Troubleshooting
Troubleshooting... -
Page 15: Parts Breakdown
Parts Breakdown... - Page 16 Parts - Adjustable Stand Modified Main Frame Skid & Leg Assembly...
- Page 17 EC019.001 PARTS LIST REF. PART NUMBER DESCRIPTION QTY. LS18.101 HANDLE COVER ECO19.101 DRAW BAR DP8x60 LOCK PIN D8x60 D 8x60 GB6170-M12 NUT M12 LP12 LOCK PIN 12 • T150.101 LOWER HITCH PIN ECO19.011 MAIN FRAME,WDMT GB5782-M10x90 BOLT M10x90 M10x90 GB97.1-10 PLAIN WASHER 10 GB889.1-M10 LOCK NUT M10...
- Page 18 Parts Breakdown - Continued...
- Page 19 EC019.002 PARTS LIST REF. PART NUMBER DESCRIPTION QTY. REACH 04-3560 CLAMPING COUPLING 3560 • 3560 ECO19.103 PULLEY F90507 BEARING F90507,SET F90507 GB889.1-M12 LOCK NUT M12 GB97.1-12 PLAIN WASHER 12 ECO19.003 ROTOR,ASSY GB5783-M10x25 BOLT M10x25 M10x25 GB93-10 LOCK WASHER 10 GB97.1-10 PLAIN WASHER 10 ECO19.019 PATCHING PLATE,WDMT...
- Page 20 Parts Breakdown - Continued...
- Page 21 EC019.003 PARTS LIST REF. PART NUMBER DESCRIPTION QTY. ECO19.023 ROTOR,WDMT ECO19.114 SPACER GB2673-M8x30 COUNTERSUNK SCREW M8x M8x30 ECO19.115 KNIFE GB97.1-8 PLAIN WASHER 8 GB889.1-M8 LOCK NUT M8 ECO19.024 SHAFT HOLDER,WDMT ECO19.120 SHORT SPACER GB879-5x35 SPRING PIN 5x35 5x35 ECO19.116 SHAFT ECO19.119 LONG SPACER ECO19.117...
-
Page 22: Parts Request Form
Parts Request Form Fax to 541‐895‐2756 or E‐mail parts@betstproducts.com Name: Model• Number: Address: Serial• Number: City• State• Zip: Purchased• From: Phone: Purchase• Date: E‐mail: Item• No. Description Price Amount Comments:... -
Page 23: Limited Warranty & Registration Form
Farmer Helper Machinery Brand LIMITED WARRANTY FARMER HELPER MACHINERY CO. LTD. warrants to original Purchaser that F A R M E R H E L P E R M A C H I N E R Y C O . L T D . products are free from major defects in material under normal use and service for a period of Two (2) Years from the date the product is purchased or shipped, whichever is later. - Page 24 WARRANTY VOID IF REGISTRATION IS NOT RECEIVED OR RECORDED ONLINE WITHIN 30 DAYS OF PURCHASE DATE OR SHIP DATE, WHICHEVER IS LATER. FARMER HELPER MACHINERY REGISTRATION Item________________________________Model # _________________ Purchase Date_____/_____/_______ Purchased From: ________________________________Gifto Inv#/Order# ____________________________ Owner Name: _______________________________________ Serial # (if Applicable)______________________ Owner Address: _______________________________________ City: ________________________ County: ___________ ST: ______ Zip Code: _____________ Phone: _______________________ Email: ________________________...
-
Page 25: Year Extended Warranty & Registration
2 YEAR EXTENDED WARRANTY & REGISTRATION Farmer Helper Machinery Branded Products 2 YEAR EXTENDED WARRANTY 2 Year Extended Warranty amends to original Recorded Manufacturers Warranty Registration the time period of described coverage. Extended Warranty does not apply to Consumable and Expendable Items as described in Product Warranty Registration. This Amendment does not affect any other part of recorded Warranty Registration or Policy.
Need help?
Do you have a question about the ECO-19 and is the answer not in the manual?
Questions and answers