Panasonic VIERA TH-P42U20A Operating Instructions Manual page 26

Menu Item
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
Off Timer
Child Lock
Favourites
Edit
Channel List
Auto Tuning
Manual Tuning Sets the TV channels manually (p. 30 , 31)
Update
Channel List
New Channel
Message
Signal
Condition
Add MPEG-4
AVC Channels
Teletext
Side Panel
Input Labels
Banner
Display
Timeout
Playing Time
Display
26
Adjustments / Configurations (alternatives)
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Press the OK button to reset the present PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the present DVI Position settings to the
default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 13)
Locks a channel / AV input to prevent access to it (p. 32)
Creates list of favourite channels (Digital TV mode) (p. 29)
Skips the unwanted channels or edits channels (p. 29, 31)
Sets all Digital TV or Analogue TV channels automatically (p. 30 , 31)
Updates the channel list with keeping your settings (Digital TV mode) (p. 30)
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (Off / On) (p. 30)
Checks the Digital TV signal condition (p. 30)
Activates the reception of MPEG-2 and MPEG-4 AVC channels
●
Use this function if MPEG-4 AVC services start in your area.
●
All previous tuning setting are erased.
●
Once activated, this option is removed from the Digital TV Tuning Menu.
Teletext display mode (TOP(FASTEXT) / List) (p. 17)
Increases the brightness of the side panel (Off / Low / Mid / High)
●
The recommended setting is "High" to prevent panel "image retention".
Labels or skips each input terminal (p. 33)
Sets how long the information banner stays on screen (p. 14)
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to "On" to display a continuous record of time spent using Game mode
every 30 mins (Off / On)
●
This function is available when "Game" is selected in "Viewing Mode" (p. 24).
●
Set to the minimum level if noise occurs