Mounting On A Wall - LG 22LN410D Easy Setup Manual

Mounting on a wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the wall
mount bracket on a solid wall perpendicular to the
floor. If you are attaching the TV to other building
materials, please contact qualified personnel to
install the wall mount. Detailed instructions will
be included with the wall mount. We recommend
that you use an LG brand wall mount. The LG wall
mount is easy to adjust or to connect the cables.
When you do not use LG's wall mount bracket,
use a wall mount bracket where the device is
adequately secured to the wall with enough space
to allow connectivity to external devices. If you are
using a non-adjustable mount, attach the mount
to the wall. Attach the cables to the TV first, then
attach the TV to the mount.
100 mm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
22LJ4540
24LJ4540
Model
24LF454B
22LN410D
VESA (A x B)
A
75 x 75
B
Standard screw
Number of
screws
Wall mount
bracket
(optional)
10
100 mm
(3.9 inches)
100 mm
100 mm
100 mm
28LJ4540
100 x 100
M4
4
LSW149
CAUTION
y Must use the enclosed screw in the box.
y
(Depending on model)
y Disconnect the power before moving or
y
installing the TV. Otherwise electric shock may
occur.
y Remove the stand before installing the TV on a
y
wall mount by performing the stand attachment
in reverse.
y If you install the TV on a ceiling or slanted wall,
y
it may fall and result in severe injury. Use an
authorized LG wall mount and contact the local
dealer or qualified personnel. When using a
third-party wall mount, it is not covered by the
warranty.
y Do not overtighten the screws as this may cause
y
damage to the TV and void your warranty.
y Use the screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
y Screw length from outer surface of back cover
y
should be under 8 mm (0.3 inches).
Wall mount Pad
Back Cover
NOTE
y Use the screws that are listed on the VESA
y
standard screw specifications.
y The wall mount kit includes an installation
y
manual and necessary parts.
y The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
y The length of screws may differ depending upon
y
the wall mount. Make sure to use the proper
length.
y For more information, refer to the manual supplied
y
with the wall mount.
Wall mount Pad
Back Cover
Standard
screw
: M4 x L10
Max.8 mm
(0.3 inches)