Philips Signage Solutions 50BDL3050Q User Manual page 42

3)Storage Path
Show default path: Internal storage
Note:
Can only display Internal storage, cannot be modified.(Only show
path)
4) Will show Server is unbinded if Remote control server feedback
unbinded status.
5) Port
Set up FTP port number. Default: 2121
Note:
Input limitation
(1) Length: Max 5 characters
(2) Range: 1024 ~ 65535
(3) Format: Number 0-9
(4) Unavailable port: 5000
(5) The port number must more than 1024
3. Remote Control
Via Enable/Disable to Control Remote Control On/Off
User can input Server address. If server does not registered, it will ask
user for PIN code.
Bind status:
(1) Will show network is disconnected if not yet connects to
network.
(2) Will show Server is disconnected if network connected but
remote control server disconnected.
(3) Will show Server is unbinded if Remote control server feedback
unbinded status.
(4) Will show Server is binded if Sever binded successfully.
(5)Will show Error PIN code if input incorrect PIN code.
32