Unpacking And Assembly; Set Up And Operation; Cleaning - Shop-Vac Shop-Air 119D Series User Manual

Commercial/industrial/household use floor fan

Hide thumbs

Table of Contents

Available languages

GROUNDING INSTRUCTIONS (CONT'D.)

CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK. CHECK WITH A QUALIFIED

ELECTRICIAN OR SERVICE PERSON IF YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS

PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE APPLIANCE – IF

IT WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED

ELECTRICIAN.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug

illustrated in sketch A. A temporary adaptor that looks like the adaptor illustrated in sketches B and C may

be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is

not available. The temporary adaptor should be used only until a properly grounded outlet (sketch A) can

be installed by a qualified electrician. The green colored rigid ear, lug or the like extending from the adaptor

must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the

adaptor is used, it must be held in place by a metal screw.

IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY THE CANADIAN ELECTRICAL

CODE. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No

adaptor should be used with this appliance.

SKETCH A

1. Remove fan from foam packaging inserts.

2. Install stand onto mounting bolts located on fan housing.

3. Position fan housing to angle required for operation.

4. Tighten knobs by hand to secure the fan (no tools required).

1. To use the unit, place it in the area most suitable for your application. Several factors need to be

considered; the unit must have a minimum of 3 feet of clearance on both the intake and exhaust sides

of the fan to allow for proper airflow. The unit should not be placed where it can become a tripping or

safety hazard.

2. To adjust angle of fan: Loosen knobs with hands. Rotate fan housing to desired angle. Tighten knobs with

hands to secure fan housing in place.

3. Plug the unit into the wall.

4. Turn unit on and select air speed by

the unit.

5. When you no longer need the unit, turn the unit off and follow the instructions for storage in this manual.

WARNING

ACCIDENTALLY STARTING, UNPLUG POWER CORD BEFORE CLEANING.

The outside of the unit may be cleaned with a damp cloth to remove any dust or residue.

PAGE 4

GROUNDING METHODS