Table of Contents
Advertisement
4.1.6
TPM Availability
Trusted Platform Module (TPM) is a hardware-based cryptoprocessor to secure hardware by
integrating cryptographic keys into devices. The system is designed with on-board TPM 2.0
module. As TPM 2.0 requires 64-bit Windows 10 with UEFI boot mode, it is enabled in BIOS
by default.
To enable TMP availability:
1.
When system boots up, press F2 to enter BIOS setup utility.
2.
Go to [Security] > [TPM Availability], press ENTER to bring up Options, Available/
Hidden.
3.
Highlight your selection, press ENTER and press F10 to "Exit Saving Changes".
Nuvo-7160GC/ Nuvo-7164GC Series
111
Advertisement
Table of Contents
