Installation and connection
en
During installation, ensure that:
The dryer is placed on a clean, level
■
and firm surface,
The mains plug can be accessed at
■
all times,
The air inlet on the dryer is kept clear
■
and there is sufficient ventilation,
The area around the dryer is kept
■
clean and
The dryer is levelled using the
■
threaded feet.
Check the alignment of the
Note:
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
If in doubt, have the appliance
Note:
connected by a specialist.
14
Optional accessories
Order optional accessories
sales service:
Washer-dryer stack connection set:
■
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400;
Order number without pull-out
worktop: WTZ20410.
Basket for woollens:
■
Dry individual woollen items, sports
shoes and soft toys in the basket for
woollens.
Order number: WMZ20600.
Connecting kit for the
■
condensation drain:
Use a hose to draw off the
condensation immediately.
Order number: WTZ1110.
Transport and frost protection
To empty the condensate container:
Use the program selector to select
1.
any program.
Press the Start button.
2.
Wait for 5 minutes.
3.
The condensation is drained.
Note:
Empty the condensate container
4.
again.
Switch off the dryer.
5.
Caution!
Any residual water may leak out and
cause material damage.
Transport the dryer in an upright
position.
*
Depending on the model
*
from after-