Important Fitting A Different Plug - Beko WTG841M2W User Manual

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off
and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock
hazard if inserted into a socket elsewhere in the house. The moulded plug on this
appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved
BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the
event of losing the fuse cover, the plug must not be used until a replacement fuse cover
has been fitted. Colour of the replacement fuse cover must be the same colour as that
visible on the pin face of the plug. Fuse covers are available from any good electrical store.
Important
Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals on your plug, proceed as follows:
1 Connect the green - yellow or green (earth) wire to the terminal in the plug marked 'E'
or with the symbol f or coloured green and yellow or green.
2 Connect the blue (neutral) wire to the terminal in the plug marked 'N' or coloured black.
3 Connect the brown (live) wire to the terminal in the plug marked 'L' or coloured red.
With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified electrician.
10 / EN
Washing Machine / User's Manual