Panasonic Lumix DMC-LX15 Operating Instructions For Advanced Features page 125

3
(When selecting [Range Merging])
Touch the focus point
• Select positions at two or more points.
• Focus positions between the two points are selected and the
range of the in-focus portion is displayed.
• The ranges that are greyed out are positions that cannot be
selected, or that would produce an unnatural result if selected
for focus stacking.
• Touch a position again to deselect it.
• If you drag the screen you can then continue to select positions.
Operation
[Fn2]
[DISP.]
[MENU/SET]
4
Touch [
• The picture will be saved in JPEG format with recording information (Exif information) from the
nearest position's picture, including its shutter speed, aperture and ISO sensitivity information.
●
In the following cases, [Focus Stacking] may produce an unnatural picture:
• If the subject is in motion
• If there are large differences in distance to the subject
• If there is significant blurring (recording with a larger aperture might make the picture less
unnatural)
●
Auto compensation is applied to deviations among pictures due to camera shake. In such cases,
the angle of view will be slightly narrower at the time of focus stacking.
●
Only pictures taken using [Post Focus] are eligible for [Focus Stacking].
125
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Touch operation
Touch
[Set/Cancel]
[All]
[Reset]
] to combine and save the picture
Description
Select the touched position
Set/Clear the position
Select all positions (Before
selecting position)
Deselect All (After selecting
position)
Combine and save picture
4K Photo and Drive Settings
Reset Reset
Reset Reset
Set/Cancel Set/Cancel
Set/Cancel Set/Cancel
SQW0724