Subscribe to Our Youtube Channel
Related Manuals for Tektronix TMSST2
Summary of Contents for Tektronix TMSST2
- Page 1 TMSST2 LGA771, LGA775, and PGA604 Socket Hardware Support Instruction Manual (Includes TMSDPH2 SOCKET T/J 771/775 LGA Installation instructions) www.tektronix.com 071-1665-02...
- Page 2 Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material.
- Page 3 Warranty 9(b) Tektronix warrants that the media on which this software product is furnished and the encoding of the programs on the media will be free from defects in materials and workmanship for a period of three (3) months from the date of shipment. If any such medium or encoding proves defective during the warranty period, Tektronix will provide a replacement in exchange for the defective medium.
- Page 4 Warranty 2 Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
-
Page 5: Table Of Contents
..............TMSST2 LGA771, LGA775, and PGA604 Socket Support... - Page 6 ........Table 12: TMSST2 latched signal group assignments .
-
Page 7: General Safety Summary
Do Note Operate in an Explosive Atmosphere. Keep Product Surfaces Clean and Dry. Provide Proper Ventilation. Refer to the manual’s installation instructions for details on installing the product so it has proper ventilation. TMSST2 LGA771, LGA775, and PGA604 Socket Support... - Page 8 CAUTION indicates a hazard to property including the product. The following symbol(s) may appear on the product: Protective Ground CAUTION WARNING Mains Disconnected Mains Connected Refer to Manual High Voltage (Earth) Terminal ON (Power) OFF (Power) TMSST2 LGA771, LGA775, and PGA604 Socket Support...
-
Page 9: Service Safety Summary
Dangerous voltages or currents may exist in this product. Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective panels, soldering, or replacing components. To avoid electric shock, do not touch exposed connections. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 10: Environmental Considerations
European Union’s requirements according to Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). For information about recycling options, check the Sup- port/Service section of the Tektronix Web site (www.tektro- nix.com). Restriction of Hazardous Substances This product has been classified as Monitoring and Control equipment, and is outside the scope of the 2002/95/EC RoHS Directive. -
Page 11: Preface
Preface Preface This document contains specific information about the TMSST2 LGA771, 775, and PGA604 Socket Hardware support product and contains information on how to operate this product on compatible Tektronix logic analyzers. If you are familiar with operating a microprocessor support product with the logic analyzer, you need only this manual to set up and run the probe adapter (processor unit and probe head). - Page 12 Preface viii TMSST2 LGA771, LGA775, and PGA604 Socket Support...
-
Page 13: Getting Started
For optional and standard accessories for this product, see Accessories on page 16. For a list of replaceable parts, see page 13. Logic Analyzer Configuration To use the preprocessor unit and probe head to acquire most signals, you need a Tektronix logic analyzer with four merged 450 MHz TLA7AX4, , logic analyzer modules. -
Page 14: Connect The P6860 Probes And Tmscab1 Cables
The P6860 probe connector is keyed for correct alignment to the preprocessor unit. Quick Tip. To prevent faulty connections and loss of data, check that the probe board connections are clean and free of debris. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 15: Configure The Preprocessor Unit
The connectors provide access for monitoring the voltages. Schematic diagram of connectors, jumpers, and offset adjustment circuitry Connectors GTLREF and offset jumpers Offset adjustments Figure 1: Preprocessor jumper, adjustment, and connector locations TMSST2 LGA771, LGA775, and PGA604 Socket Support... - Page 16 GTLREF signal equal to 0.7 V). Therefore, if the AVERAGE GTLREF jumper is moved to the disabled position, an offset only selection sets the resultant voltage at 1.08 V. NOTE. All jumpers and connectors are located on top of the preprocessor unit. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
-
Page 17: Table 1: Gtlref Enable Jumpers
GTLREF signal is used to generate a reference voltage for 13 target signals. To guarantee that the average GTLREF signal is at an appropriate level, the average GTLREF signal defaults to the processor land H1 on the DUT, if all five jumpers are placed in the disabled position. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 18: Table 3: Reference And Terminator Connectors
LGA771/LGA775 jumper. Select the socket that your target processor uses. Table 5: LGA771/LGA775 jumper Socket name Pin position PGA604 1- - 2 (default) LGA775 1- - 2 (default) LGA771 2- - 3 TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 19: Connect The Probe Head To The Dut
WARNING. To prevent personal injury or damage to the preprocessor unit, do not open the preprocessor unit. There are no operator-serviceable parts inside the preprocessor unit. Refer servicing of internal parts in the preprocessor unit to Tektronix authorized personnel only. External parts may be replaced by qualified service personnel. Airflow Clearance Table 15 lists airflow clearances on all sides of the preprocessor unit that are needed when using the probe head. - Page 20 Attach the custom load plate. Load plates are vendor-specific. Use the load plates marked with an “F” with the Foxconn socket and the load plate marked with a “T” with the Tyco socket. Close the ZIF lever. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
- Page 21 Open the ZIF lever and load plate on the probe head. Remove the socket cover. Install the microprocessor, carefully align- " ing pin 1 indicators ( Close the probe-head load plate. Close the ZIF lever. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
- Page 22 A to A, and so forth. Apply forced-air cooling across the micro- processor and heat sink to keep the mi- croprocessor from overheating unless you are using a forced air-cooled heat sink and fan assembly. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
- Page 23 A to A, and so forth. Apply forced-air cooling across the micro- processor and heat sink to keep the mi- croprocessor from overheating unless you are using a forced air-cooled heat sink and fan assembly. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
-
Page 24: Applying And Removing Power
A green, power-on LED lights on the front of the preprocessor unit, indicating that the preprocessor unit is active. Power on the DUT. To remove power from the DUT and the preprocessor unit, reverse the preceding steps. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 25: Replaceable Parts List
CD to the Tektronix logic analyzer system software. To install the TMSST2 software on the Tektronix logic analyzer, follow these steps: 1. Insert the CD in the CD drive. 2. Select the Windows Start button > Con- trol Panel >... -
Page 26: Support Package Setup
1. Open a system window and from the file menu, select Load Support Package. 2. In the Load Support Package dialog box, select the support and click load. 3. Follow the on-screen instructions. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 27: Reference
Reference Circuit Description The preprocessor unit and probe head processes all signals on the microprocessor before the logic analyzer captures the signals. The TMSST2 product performs the following functions: Latches signals within a narrow valid window Demultiplexes quad-pumped, source-synchronous signals... -
Page 28: Accessories
Reference Accessories Standard Accessory The following standard accessory is shipped with the TMSST2 preprocessor unit: Quantity Accessory Part number MICRO SUPPORT; SW; PUB32G11,W/HARDWARE MANU- 063-3835-XX AL;TMSST2 ACCESSORY KIT; LGA771 HEAT SINK;TMSDPH2 020-2650-XX ACCESSORY KIT; LGA775 HEAT SINK;TMSDPH2 020-2708-XX Optional Accessories... -
Page 29: Tmscab1 Labels
(module end) 5. No label on the underside of this connec- tor. 6. Align and place the label in the label in- dent (module end). 7. No label on this side of the connector. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 30: Probe Adapter Notes
If data is acquired before a processor Reset signal is observed by the preprocessor unit, the data acquired by the logic analyzer will be inaccurate. Data Bus. The TMSST2 product supports only a quad-pumped data bus. Address Bus. The TMSST2 product supports only a double-pumped address bus. -
Page 31: Maintenance
WARNING. To prevent personal injury or damage to the probe head, do not allow any moisture inside the probe head. Refer servicing of external parts in the probe head to only Tektronix authorized personnel. External parts may be replaced by qualified service personnel. -
Page 32: Storage
(0.64 cm) at the fold. Using non-static generating tape, tape the socket cover onto the pin header on the bot- tom of the probe head. Store the probe head in the black case it was shipped in. TMSST2 LGA771, LGA775, and PGA604 Socket Support... - Page 33 Place cables carefully over the top of the preprocessor unit. Place probe head and cables in the appropri- ate cutouts. Place other accessories in the accessory tray. Close and tape the cardboard carton. TMSST2 LGA771, LGA775, and PGA604 Socket Support...
-
Page 34: Shipping The Probe Head
Fill this space with nonstatic packing material. If you are shipping a preprocessor unit or probe head to a Tektronix service center for warranty service, attach a tag to the product showing the following: The RMA number Owner’s name and address... -
Page 35: Specifications
These specifications are for a probe adapter (preprocessor unit and probe head) that is connected between a compatible Tektronix logic analyzer and a target system. All specifications are typical. This section also outlines the electrical and mechanical requirements that the system-design engineer must observe during the planning and designing of their target system. -
Page 36: Table 8: Gtlref Reference Voltage Requirements For The Target System
Because of propagation delay and slew rate differences between V and V , acquisition is not guaranteed to be TERM error-free during reference voltage transitions that violate the Slew Rate or Edge Rate limits TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 37: Ac/Dc Signaling
Specifications AC/DC Signaling The TMSST2 preprocessor unit divides the front side bus signals into different acquisition groups depending on the characteristics of each signal. Each signal group is acquired using a different acquisition topology and has unique AC and DC requirements. -
Page 38: Strobe Signals
The time domain hysteresis is different for the DSTB and ADSTB groups. For the DSTB group, any nonmonotonic anomaly within 0.8 ns of an incident falling-edge is ignored. For the ADSTB group, any nonmonotonic anomaly within 1250 ps of the incident falling or rising edge is ignored. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 39: Latched Signals
Specifications Latched Signals Table 12: TMSST2 latched signal group assignments Group Signals Latching Description edge Ω (LGA771 and 775 sockets) BNR, BPM[5:0], BPRI, BR[1:0], BCLK load, terminated to V ; latched TERM DBSY, DEFER, FERR, IERR, by LA module LINT[1:0], LOCK, NMI, MCERR, PROCHOT, RSP, THERMTRIP, TRDY Ω... -
Page 40: Figure 5: Latched Signal Group Requirements
L5 valid time before edge 250 ps L5_VB 1,2,3 L5 valid time after edge 250 ps L5_VA 1,2,3 L5 input high voltage +75 mV L5_IH REFA 1,2,3 L5 input low voltage - - 75 mV L5_IL REFA TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 41: Table 14: Electrical Specifications For Ac Input To The Preprocessor Unit
24 Kg (53 lbs) and packaging Not to exceed microprocessor thermal considerations. Customer supplied cooling might be required across the CPU. Refer to the instruction manual for the TMSSPH1 probe head for temperature specifications. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 42: Certifications And Compliances
Pollution Degree 4. Pollution that generates persistent conductivity through conductive dust, rain, or snow. Typical outdoor locations. Pollution Degree Pollution Degree 2 (as defined in IEC 61010-1). Note: Rated for indoor use only. TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 43: Loading Diagrams
0.5 pF 0.5 pF Figure 6: Mated Samtec load model TD=83 ps TD=5 ps Z0=75 Ω Z0=100 Ω 0.2 Ω 450 fF 75 Ω 225 fF VREF~0.8 V Figure 7: Receiver load model TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 44: Figure 8: Electrical Load Model For Typical Signals
0.7 pF 0.7 pF 75 Ω 0.4 pF 75 Ω ~44’’ ~1300 mils 4.18 ns 213 ps Mated Receiver Samtec 0.7 pF 0.7 pF 0.7 pF Figure 8: Electrical load model for typical signals TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 45: Figure 9: Dimensions Of The Probe Head
Socket pin 1 1.625 mm (0.064 in) 17.20 mm (0.677 in) 1.88 mm 1.88 mm (0.074 in) (0.074 in) 11.55 mm 4.57 mm (0.455 in) (0.180 in) Figure 9: Dimensions of the probe head TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 46: Figure 10: Dimensions Of The Preprocessor Unit
7 (clearances are not shown in Figure 10). 474.32 mm (18.674 in) 425.45 mm (16.750 in) 420.37 mm (16.550 in) 139.70 mm 160.27 mm (5.500 in) (6.310 in) Figure 10: Dimensions of the preprocessor unit TMSST2 LGA771, LGA775, and PGA604 Socket Support... -
Page 47: Design Review Checklists
System designers should import the probe head KOV model into their modeling environment to ensure that the probe head can be placed in the platform without any interference. Contact your Tektronix sales representative to obtain the latest ProE probe head KOV model. - Page 48 Specifications TMSST2 LGA771, LGA775, and PGA604 Socket Support...
- Page 49 GTLREF jumpers, 5 electrostatic immunity, 29 hardware description, 1 temperature, 29 jumper positions, 3 offset adjustments, 3 termination and reference voltages, 6 voltage connections, 3 GTLREF jumpers, 5 Probe configuration, 2 Installing support software, 13 TMSST2 LGA771, LGA775, and PGA604 Socket Support...
- Page 50 TMSDPH2 installation, to target system, 8 airflow clearance, 7 TMSSPH1 installation, to target system, 8 BCLK, 25 design review checklists, 35 DSTB strobe signal, 26 electrical, 23 Weight, 29 environmental, 29 GTLREF voltage, 24 TMSST2 LGA771, LGA775, and PGA604 Socket Support...
Need help?
Do you have a question about the TMSST2 and is the answer not in the manual?
Questions and answers